Custom Window & Door Order Cost - Free Measure, Exact Written Quote

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

How Much Does Custom Window & Door Order Cost in Sunrise?

Custom window and door orders in Sunrise, FL typically run between $850 and $6,200 per opening, depending on size, glass specification, frame material, and impact rating. Most Sunrise homeowners ordering impact-rated custom units for a standard 2,000-2,500 sq ft home land somewhere between $12,000 and $38,000 for a full-home project, including installation. That range is wide because “custom” covers everything from a single geometric accent window in a Sunrise Lakes townhouse to a full complement of PGT WinGuard casements for a new build off Pine Island Road.

Custom Window and Door Order Cost Breakdown (2026)

The table below reflects pricing we document in written quotes for Sunrise projects in 2026. These are installed costs – product plus labor, permit, and disposal of the old unit. No number here is a starting point for negotiation; under Haven Clause 1 (Have It in Writing), the price in your measured survey is the price on the final invoice.

What shifts the number up or down? The single biggest variable in Sunrise is glass specification. A standard laminated impact unit with a basic low-E coating sits at the low end of each range. Add a high-performance solar coating (lower SHGC – solar heat gain coefficient – which matters in Broward County sun exposure), upgrade to a triple-glazed unit, or specify a tinted interlayer, and the glass alone can add $180 to $600 per opening. Frame material is the second lever: extruded aluminum frames, which handle South Florida humidity without swelling, cost more upfront than vinyl but carry a longer service life in Sunrise’s climate. Finally, any opening that requires a rough-opening modification – cutting, blocking, or structural header work – adds $400 to $900 per opening in labor.

Lead time also affects total project cost in a practical sense. Standard catalog sizes from PGT or CGI ship in 3 to 6 weeks. True custom sizes – non-standard widths, non-rectangular shapes, or specialty glazing configurations – can run 8 to 14 weeks from the manufacturer. If your Sunrise project is tied to a closing date or a renovation schedule, that timeline affects how you sequence the work, which can add staging costs.

What Affects Custom Window and Door Pricing in Sunrise

• Impact rating and glass specification: Broward County requires impact-rated glazing or a combination of impact windows and storm shutters for all residential openings. In Sunrise specifically, the wind-borne debris zone designation means most custom orders need to meet Miami-Dade NOA (Notice of Acceptance) standards. Units that carry a Miami-Dade approval cost more to manufacture than standard impact units, and that difference shows up in the per-opening price.
• Frame material and finish: Extruded aluminum is the dominant frame material in Sunrise because it tolerates the combination of high humidity, salt-influenced air from the coast, and direct sun exposure without degrading. Anodized finishes hold color longer than painted aluminum in this climate. Vinyl frames cost less initially but may require more frequent inspection in South Florida heat cycles. Each material lands at a different price point in your written quote.
• Opening size and shape: Anything outside a manufacturer’s standard size matrix is built to order on a custom cutting and fabrication schedule. Arched tops, trapezoids, circles, and other geometric forms – common in Sunrise Lakes estates and some of the newer construction along NW 136th Avenue – require handcrafted glazing work that adds both fabrication time and cost. A round porthole window, for example, costs 60 to 100 percent more per square foot than a rectangular unit of equivalent glass area.
• Rough opening condition and structural modifications: Homes built in Sunrise before 2002 – the year Florida adopted its current statewide building code – often have wood-framed rough openings that show moisture damage, out-of-square corners, or undersized headers. Our measured survey documents every rough opening condition before we write the price. If blocking, shimming, or header replacement is needed, it is priced in the written quote, not added as a surprise on installation day.
• Permit fees and inspection schedule: Custom window and door orders in Sunrise require a City of Sunrise building permit. Permit fees are calculated on project valuation and typically run $180 to $420 for a residential window and door project, paid to the city. The permit also triggers a city inspection after installation, and scheduling that inspection around your calendar can affect overall project duration. We handle the permit application and coordinate the inspection as part of the documented process.
• Number of openings and project complexity: Volume matters. A single custom replacement window costs more per opening than a 20-unit order from the same manufacturer line. On a full-home custom order in Sunrise, the per-opening cost typically drops 8 to 15 percent compared to ordering individual units over time, because fabrication, delivery, and installation can be batched efficiently. We note this in the written quote so you can compare scenarios side by side.

Before

After

How to Save on Custom Window and Door Orders in Sunrise

Order multiple openings at once

The most straightforward cost reduction available is batching. If you know three windows need replacement this year and two more are likely within 18 months, ordering all five together reduces your per-unit fabrication cost and your permit fees. In Sunrise, where labor mobilization and permit scheduling carry a fixed cost per project regardless of unit count, batching regularly saves homeowners $1,200 to $3,000 on a mid-size order compared to phasing the same units over separate visits.

Match the product to what the opening actually requires

Overshooting the specification is common in custom orders. A north-facing interior hallway window in a Sunrise home doesn’t need the same solar coating as a west-facing great room wall of glass. We specify by what each opening requires – U-factor, SHGC, impact rating – not by what’s available at a given margin. That discipline, built into how we write every measured survey, regularly saves $200 to $500 per opening on openings where a lower-specification unit meets code and performs correctly.

Bring a competitor’s written quote

If you already have a written estimate from another Sunrise contractor, bring it to us. Our Free Second Opinion on Any Written Estimate means we’ll review it at no charge – line by line, product spec by product spec. We’ve found, consistently, that vague line items (“window installation – standard”) often conceal costs that appear later. We’ll tell you what’s in the quote, what’s missing, and what our price would be for the same scope, in writing, before you decide anything.

Understand what “custom” means for your specific opening

Not every non-standard situation requires a fully custom-fabricated unit. Some openings that look like they need custom glass can be fit with a catalog size that’s trimmed to fit during installation – a less expensive path that we document and price separately so you can compare. We surface that option in the written survey when it’s genuinely available. When a true custom fabrication is required, we say so and explain why, citing the sightline measurement and the rough opening dimensions.

Plan around lead times, not against them

Rush fabrication, when it’s available at all, carries a premium of 15 to 25 percent on the product cost. If your timeline is flexible, specifying standard lead times from PGT, CGI, or CWS – typically 3 to 6 weeks for custom units from these lines – avoids that surcharge entirely. We date-stamp your order confirmation and build the lead time into the written project schedule so there are no surprises.

For a free estimate on your Sunrise project, call (754) 254-5294. A live person answers every call – not a voicemail queue. We’ll schedule a measured survey, write the price before any work starts, and give you a document you keep regardless of whether you move forward with us.

How Sightline Prices Custom Orders: The Measured Survey

Most custom window and door quotes in Sunrise start with an estimator who measures on-site, goes back to the office, and sends a number days later. Our process is different, and the difference matters for the price you see.

We conduct a measured survey – every rough opening read in person, documented with dimensions, condition notes, and a photo. That survey becomes the written quote. The two documents are the same document. Under Haven Clause 1 (Have It in Writing), the price in your survey cannot differ from the final invoice. There is no “estimate subject to final measurement” language, because the measurement and the estimate happen together.

Every technician who arrives at a Sunrise home for this survey is background-checked, uniformed, and identified by license number before arrival – Haven Clause 3 (Verified Crews). You know who to expect before the truck pulls up.

After installation, every opening gets a documented photo record. You receive that record as part of the job file. If anything is not done right within 365 days of installation, the 365-Day Done Right Promise covers it – written into the Haven Standard, not offered as a courtesy.

Sonia Raman leads Sightline Windows and Doors and has built the Haven Standard around a single operating principle: the customer should never be surprised by a number on an invoice. Since 2012, across more than 18,000 openings installed in South Florida – many of them custom orders in Broward County – that principle has governed every written quote we’ve produced.

Custom Window and Door Products We Order for Sunrise Homes

We draw from eight manufacturer lines, specified by what each opening requires. For custom orders in Sunrise, the most frequently used lines are:

• PGT Winguard: The most common impact-rated custom window line in Broward County residential projects. PGT’s custom fabrication program covers non-standard sizes in single-hung, casement, awning, and picture configurations. Lead time on custom PGT units runs 4 to 7 weeks from confirmed order.
• CGI Windows and Doors: CGI’s Guardian line handles large-format custom openings well – sliding glass doors beyond 10 feet wide, floor-to-ceiling fixed panels, and custom entry door units. Pricing on CGI custom units trends slightly higher than PGT per square foot, with a corresponding upgrade in frame finish options.
• CWS (Custom Window Systems): Strong value position for custom sliding doors and impact windows. CWS fabricates to non-standard dimensions efficiently, and their lead times on custom residential orders – typically 3 to 5 weeks – are shorter than some premium lines.
• ES Windows: ES handles large custom casement and impact window configurations at a competitive price point. Their aluminum extrusions are well-suited to Sunrise’s climate conditions.
• ECO Window Systems: ECO is our specification for complex geometric shapes – arched tops, circles, triangles, trapezoids. Their custom shape program is among the most capable available from a Florida manufacturer, and we use it regularly for specialty openings in Sunrise Lakes and other established Sunrise neighborhoods.
• ViewLux and Mr-Glass: These lines cover custom impact garage doors and specialty glazed panels. For a Sunrise home where the garage door is a significant visual element – facing the street on a corner lot, for example – ViewLux’s custom size and finish program gives precise control over the final appearance.
• Therma-Tru: Our primary line for custom impact-rated entry doors. Therma-Tru’s fiberglass door systems handle South Florida humidity without the warping that affects wood entry doors over time, and their custom size program accommodates grand entry configurations common in Sunrise’s larger estate homes.

Every product we specify carries documentation: the Miami-Dade NOA number, the U-factor and SHGC ratings, and the manufacturer warranty terms. Those numbers appear in your written quote because Haven Clause 4 (Evidence on Every Job) means the document you sign matches the product that gets installed.

Sunrise-Specific Factors That Affect Your Custom Order

Sunrise sits in northwestern Broward County, with a housing stock that ranges from 1970s-era concrete block homes in Sunrise Lakes to newer construction along Commercial Boulevard and Flamingo Road. That variety creates specific conditions that affect custom window and door pricing in ways that aren’t always obvious.

Older Sunrise homes – particularly those built between 1968 and 1985 in the Sunrise Lakes community – often have jalousie windows or single-pane aluminum sliders that are being replaced for the first time. These openings typically require rough opening modification because the original frames were not designed to accept modern impact-rated units. Budget $400 to $800 per opening for that modification work when you’re ordering custom replacements for original jalousie openings.

Homes in the northwestern sections of Sunrise near the Everglades edge see higher humidity cycling than those closer to University Drive. That affects frame material selection: we’ve documented higher rates of aluminum frame corrosion on units installed without proper thermal breaks in that micro-zone. When we specify for those addresses, we note the condition in the measured survey and adjust the product recommendation accordingly.

The City of Sunrise building department processes residential window and door permits on a standard schedule, and custom orders – because they require manufacturer product approval documentation at permit submission – take slightly longer to permit than catalog replacements. In our experience handling Sunrise permits, plan for 10 to 18 business days from permit application to approval for a custom residential order. We submit the application with the full product documentation package to avoid back-and-forth with the building department.

Sunrise homeowners in HOA-governed communities – there are several along Nob Hill Road and in the Sawgrass area – also need HOA approval for exterior product changes before the city permit is issued. We’ve worked through this process enough times in Sunrise to know which HOAs require a product sample submission versus a specification sheet, and we flag that in the written survey if your address is in an affected community.

Comparing Custom vs. Standard Replacement Windows in Sunrise

A standard replacement window – a catalog size that drops into an existing rough opening without modification – costs less than a custom unit. For a standard 30″ x 48″ single-hung impact replacement in Sunrise, you’re typically looking at $650 to $950 installed. The same opening specified at a non-standard size, or with a custom frame color, or with a geometric modification, starts at $1,100 and climbs from there.

The question worth asking before ordering custom is whether the opening actually requires a custom unit. Our measured survey answers that directly. Some openings that appear non-standard are within catalog tolerances and can be served by a stock size with minor shimming. Others genuinely require custom fabrication – particularly original construction openings that were never built to standard dimensions. We document which category each opening falls into and price both options when both are technically available, so you choose based on full information rather than an installer’s inventory preference.

For homeowners doing research on Custom Window and Door Order in Sunrise, understanding the difference between catalog-standard and custom-fabricated units is the first step toward a written quote that doesn’t surprise you later.

FAQs – Custom Window and Door Order Cost in Sunrise

How much does a single custom impact window cost in Sunrise, FL?

A single custom impact window in Sunrise runs $850 to $2,800 installed, depending on size, frame material, glass specification, and whether rough opening modification is needed. A standard-sized custom single-hung in aluminum with basic low-E glass sits at the lower end; a large-format casement with a high-performance solar coating and frame color match sits near the top. Call (754) 254-5294 for a written number specific to your opening – estimates are free and the survey is yours to keep.

How much does a custom impact entry door cost in Sunrise?

Custom impact entry doors in Sunrise cost $2,800 to $6,200 installed for a single unit, and $4,500 to $6,200 or more for a double or grand entry configuration. Therma-Tru fiberglass impact units are the most common specification we write for Sunrise homes because they hold their dimensions in South Florida humidity without the maintenance overhead of wood. A custom size – anything outside 36″ x 80″ – adds fabrication cost and 2 to 4 weeks to the lead time.

How long does a custom window or door order take in Sunrise?

Custom window and door orders for Sunrise projects typically take 3 to 14 weeks from confirmed order to delivery, depending on the manufacturer line and the complexity of the specification. PGT and CWS custom residential units average 3 to 7 weeks. Complex geometric shapes through ECO Window Systems or large-format custom sliding doors through CGI can run 8 to 14 weeks. Add 10 to 18 business days for the City of Sunrise building permit, which we submit concurrently with the order so the two timelines overlap rather than stack.

Does Sunrise require a permit for custom window and door replacements?

Yes. The City of Sunrise requires a building permit for all window and door replacements, custom or standard, in residential properties. Permit fees for a typical residential project run $180 to $420, calculated on project valuation. We handle the permit application, submit the required product documentation (including Miami-Dade NOA numbers for impact-rated units), and coordinate the post-installation inspection. The permit cost is itemized in your written quote – it’s not absorbed into the product price or added later.

Is it cheaper to buy standard-size windows and modify the opening, or to order custom-size units?

It depends on the extent of modification required, and the answer varies by opening. Rough opening modification runs $400 to $900 per opening in Sunrise; a custom-fabricated unit for the same space adds $200 to $600 over the catalog equivalent. When modification costs exceed the custom fabrication premium, ordering to the exact opening size is the better value – and we document that comparison in the written survey for any opening where both options are technically sound. Call (754) 254-5294 and we’ll write both numbers for your specific openings.

What’s included in Sightline’s written price for a custom order?

Every written quote under the Haven Standard includes the product cost (custom fabrication to your specification), installation labor, permit fees, disposal of the existing unit, and any documented rough opening preparation required. The measured survey lists each line separately. There is no line that reads “miscellaneous” or “as needed” – every cost that belongs to the project is named in the document before work starts. The 365-Day Done Right Promise covers the completed installation, and the documented photo record is delivered when the job is finished.

Key Takeaways

• Custom window and door orders in Sunrise, FL run $850 to $6,200 per opening installed, with full-home projects typically landing between $18,000 and $38,000.
• The biggest cost variables are glass specification (especially solar coating for Broward County sun exposure), frame material, opening size, and whether rough opening modification is required.
• Broward County’s wind-borne debris zone designation means most custom orders in Sunrise must carry a Miami-Dade NOA – a factor that affects both product selection and permit documentation.
• The City of Sunrise requires a building permit for all window and door replacements. Permit processing for custom orders runs 10 to 18 business days.
• Batching multiple openings in a single order typically reduces per-opening cost by 8 to 15 percent compared to ordering individually.
• Sightline’s measured survey is the written quote – the two documents are the same, and the price cannot change between survey and invoice.
• The 365-Day Done Right Promise covers every Sightline installation in Sunrise, in writing, under the Haven Standard.

Get a Written Price for Your Sunrise Custom Order

If you’re planning a custom window or door order in Sunrise – whether it’s a single geometric window in Sunrise Lakes or a full home of impact casements near Flamingo Road – the next step is a measured survey that produces a written price before any work starts. Sonia Raman and the team at Sightline Windows and Doors have documented more than 18,000 openings across South Florida since 2012, every one with a written price in hand before installation began.

We work from eight manufacturer lines – PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux – and specify by what your opening requires, not by what’s available at a particular margin. The measured survey is yours to keep. The written quote matches the final invoice. And if you already have a written estimate from another Sunrise contractor, bring it: our Free Second Opinion on Any Written Estimate means we’ll review it line by line at no charge.

To schedule a measured survey or ask a question about your Sunrise project, call (754) 254-5294. A live person answers every call. You can also learn more about how we approach every project on our home page.

Written by Sonia Raman, Owner at Sightline Windows and Doors, serving Sunrise, FL since 2012.

Pricing reflects the Sunrise market as of 2026. Sightline Windows and Doors Sunrise offers free estimates – call (754) 254-5294.