CGI Impact Garage Doors Nationwide | Sightline Windows & Doors Sunrise

CGI Impact Garage Doors: The Sunrise Owner’s Guide

We stock and install CGI-compatible impact garage doors in Sunrise, with typical installed prices running $2,800-$4,600 depending on door size, wind-load rating, and whether the track and hardware need replacement. Most CGI impact garage door calls we handle in Sunrise are completed within one business day once the measured survey is done. Most owners realize something is wrong when the door hangs unevenly, the opener strains at one side, or they spot rust bleeding from the bottom section after a wet season - signs that the impact-rated panel, torsion system, or sealed jamb is compromised.

Call (754) 254-5294

Which CGI Models This Applies To

CGI produces impact-rated garage doors under several series designations, and the part you need depends on which generation and wind-load zone your original installation was engineered for. We regularly work on the CGI Estate Series and CGI Sentinel Series in Sunrise, particularly in the Inverrary and Sawgrass Estates areas where installations from 2015-2020 are now showing hardware fatigue.

To identify your model, check the interior face of the bottom section for a stamped metal label or a foil certification sticker - it lists the design pressure rating (usually +55/-60 psf or higher for Broward County), the track gauge, and the spring wind specification. If the label is painted over or missing, measure the section thickness: CGI impact panels run 1-3/8″ or 2″ depending on whether the door was spec’d for the High Velocity Hurricane Zone. The 2″ thick sections use a heavier track and cannot be retrofitted with standard 1-3/8″ hardware without full track replacement.

On OEM versus quality aftermarket: CGI sources some hardware from common industry suppliers, but the impact-rated bottom seal, reinforced struts, and wind-load-certified track brackets are series-specific. We stock OEM-compatible parts that match the original certification documents, not generic substitutes that void the impact rating. Measure it right once, and the install tells you nothing went wrong.

Signs Your CGI Impact Garage Door Is Failing

• The door binds or stalls at the same height every cycle. This usually means a cracked or fatigued torsion spring, or a bent track section where the roller binds. In Sunrise, we see this most often on doors facing west, where afternoon heat cycling accelerates metal fatigue.
• Visible rust streaks from the bottom section or along the vertical track. CGI impact doors use galvanized steel, but the bottom seal retainer and jamb seal are sacrificial components. Once water wicks past them, the interior panel skin corrodes from the inside out - common after Florida’s May-through-October wet periods.
• The opener motor labors or reverses unexpectedly. This points to a door that has gone out of balance, usually from a failing spring or added weight from waterlogged insulation. The opener is not the problem; it is protecting itself from a door that no longer moves freely.
• Daylight visible around the perimeter when the door is closed. The PVC or rubber jamb seal has compressed or torn, breaking the pressure envelope. For an impact-rated door, this is both an energy leak and a structural concern - the seal is part of the wind-load system.
• Dented or delaminating panel sections, especially after a storm. CGI impact panels absorb debris strikes through a laminated skin, but repeated impacts or age-related adhesive failure cause the face to separate from the core. The door may still operate, but the impact certification is compromised.

Before

After

Replacement Cost & What’s Included

What drives the range: door width and height, wind-load rating required for your Sunrise address (Broward County requires HVHZ certification), whether the existing track is reusable, and whether the opener needs recalibration for the new door weight. Every quote we write is itemized by line - panel, hardware, labor, disposal - and the price on that document is the price on the invoice. No change orders, no “while we were in there” additions. The work carries our 365-Day Done Right Promise under the Haven Standard, and you receive the documented photo record before we leave.

DIY or Call Us?

There is one part of this work we will not describe how to do yourself: the torsion spring system. CGI impact garage doors use wound steel springs under hundreds of pounds of tension, and the winding bars required to set them correctly are not a homeowner tool. We have replaced springs for owners in Sunrise who attempted the work with a wrench and a YouTube video; the resulting injuries and bent tracks cost more than the original call would have. If your door has a broken spring, stop operating it and call us.

What you can safely check: whether the door is plugged in, whether the photo-eye sensors are aligned and clean, and whether an object is blocking the track at the binding point. Document what you find with photos - we use those during the phone call to narrow the parts list before we arrive. For everything else, the measured survey, the written scope, and the installation are a single documented engagement. Call (754) 254-5294 to schedule yours.

FAQs