VLX 100 Pivot Door

VLX 100 Pivot Door in Sunrise, FL | Sightline Windows & Doors Sunrise

The VLX 100 Pivot Door is a heavy-duty aluminum pivot door that rotates on a vertical center axis, built for homeowners and architects who want oversized glass and a true architectural statement. In Sunrise, FL, where modern homes in neighborhoods like Sawgrass Estates and Sunrise Golf Village are increasingly designed around indoor-outdoor living, this door delivers the dramatic entry point buyers expect. At Sightline Windows & Doors Sunrise, we’re an authorized ViewLux installation partner, which means your door is covered by full manufacturer warranty protection and installed to exacting standards. We’ve been serving Sunrise since 2019, and we know how Florida’s heat, humidity, and hurricane season affect every component we install. Call us at (754) 254-5294 to schedule your free on-site measurement and written quote.

Call (754) 254-5294

Product Overview - VLX 100 Pivot Door

The VLX 100 is built around a simple, powerful idea: a door should pivot, not merely swing. Instead of hanging from side-mounted hinges, this system rotates on a vertical center axis set into the floor and head jamb. That engineering choice changes everything. You get wider clear openings, cleaner sightlines, and a kinetic presence that conventional hinged doors cannot match.

Buyers in Sunrise choose this series for three reasons. First, the aluminum construction handles our climate without warping, swelling, or rotting the way wood eventually does. Second, the oversized glass panels, up to 60 inches wide and 120 inches tall, turn an entry door into a daylighting strategy. Third, the pivot mechanism itself becomes a conversation piece, a detail that signals serious design intent.

The materials back up the impression. The extruded aluminum frame uses a 0.098-inch wall thickness, substantial enough for daily operation in high-traffic homes without flexing or rattling. The 2.56-inch profile width strikes a balance, slim enough to maximize glass area yet robust enough to carry the hardware loads a pivot system demands. This is not a retrofit-friendly DIY project. The floor and header must be precisely prepared to accept the pivot hardware, which is why professional installation by an authorized partner matters for both performance and warranty coverage.

Technical Specifications

Before

After

Performance Features

Thermal Efficiency

The VLX 100 incorporates thermal break technology that separates interior and exterior aluminum surfaces with a low-conductivity barrier. This NFRC-rated system reduces heat transfer, which matters in Sunrise where summer attic temperatures routinely climb past 140°F and every thermal weak point drives up cooling costs. The thermal break keeps the interior frame surface closer to room temperature, reducing condensation risk as well.

Acoustic Performance

Aluminum pivot doors with laminated glass options deliver meaningful sound attenuation. For homes near Sunrise Boulevard, the Sawgrass Expressway, or flight paths into Fort Lauderdale-Hollywood International, the combination of thermally broken frame construction and specialized glass reduces exterior noise transmission. We specify acoustic ratings based on your exact glass selection and wall assembly.

Airtightness & Weather Seal

All perimeter joints receive AAMA 812 low-expansion foam sealant, creating a continuous air barrier between frame and rough opening. Compression seals at the door perimeter further reduce air leakage. This matters beyond energy bills; in Sunrise’s humid climate, uncontrolled air infiltration carries moisture that can damage interior finishes and degrade indoor air quality.

Waterproofing

The VLX 100 system includes integrated sill drainage and flashing compatibility. Our AAMA 2400/2410-compliant installation includes pan flashing at the sill, slope-to-drain rough openings, and sealant continuity at all penetrations. In Sunrise, where afternoon thunderstorms drop inches of rain in minutes and hurricane season brings sustained wind-driven water, this detailing separates functional doors from future insurance claims.

Wind Resistance

The aluminum frame and impact-resistant laminated glass option meet wind-load requirements for Broward County’s exposure. The pivot hardware is engineered to carry lateral loads without racking or binding. We verify structural adequacy of the surrounding wall framing during our pre-install inspection, because even the best door fails if the opening around it flexes in high wind.

Security & Hardware

The pivot mechanism uses concealed floor and head bearings with integrated locking points. Multi-point locking engages at several locations along the door edge, not just at a single deadbolt. For Sunrise homeowners, this means the impressive scale of a 10-foot pivot door does not come at the expense of sleep-at-night security.

Color & Glass Options

The six finish options suit different architectural directions common in Sunrise. Premium Black and Anodized Silver read as contemporary, fitting the clean lines of newer construction in communities like Welleby. Bronze and Champagne warm up traditional and transitional homes without the maintenance burden of actual bronze or brass. Pure White works for coastal-inspired exteriors where bright, reflective surfaces dominate. Teak Wood delivers the visual warmth of timber with aluminum’s structural honesty, a popular choice for homeowners who want organic texture without the swelling and refinishing cycles that real teak demands in South Florida humidity.

Glass selection should follow function. Clear glass maximizes views and daylight, ideal for rear entries overlooking pools or landscaped yards. Frosted and Obscure options provide privacy for street-facing or side-yard installations without sacrificing light transmission. Low-E coatings are standard recommendation for Sunrise; they reflect infrared heat while passing visible light, cutting cooling loads. Tempered glass meets safety code for doors and provides the characteristic break pattern. Laminated glass adds the impact resistance required for hurricane protection zones and delivers the acoustic benefits noted above. We walk through each option during your free estimate, considering orientation, exposure, and how you actually live in the space.

Installation by Sightline Windows & Doors Sunrise in Sunrise

We install every VLX 100 to manufacturer specification because improper installation voids the ViewLux warranty, full stop. Our process begins with a pre-install inspection of your rough opening, verifying width, height, square, and level within the tolerances this pivot hardware demands. Pivot doors are unforgiving. A quarter-inch out of plumb at the floor becomes a visible gap at the head, or worse, binding hardware that wears prematurely and leaks.

We set the frame level, plumb, and square using composite shims that won’t compress or rot. We anchor through the jamb in a pattern that secures without distorting. The AAMA 812 low-expansion foam sealant goes in all perimeter joints, expanding to fill irregularities without bowing the frame the way conventional expanding foam can. We flash the sill pan, integrate with your weather-resistive barrier, and seal every penetration.

Final installation includes operational testing of the pivot mechanism, adjustment of closing speed and latch engagement, and a water test at the sill and frame perimeter. We protect finished floors, remove all debris, and leave the door ready for your painter or ready to use in its factory finish.

Sunrise-specific considerations shape our work. The sandy soils in parts of western Sunrise can lead to subtle foundation movement; we inspect for signs of settling that might affect long-term door operation. The intense UV exposure here can degrade sealants prematurely if inferior products are used, so we specify only UV-stable materials rated for South Florida exposure. And we pull permits when required by the City of Sunrise Building Division, with inspections passed before we consider the job complete.

Frequently Asked Questions - VLX 100 Pivot Door

Get a Quote - VLX 100 Pivot Door in Sunrise

Ready to see how a VLX 100 Pivot Door transforms your Sunrise home? Call Sightline Windows & Doors Sunrise at (754) 254-5294 to schedule your free on-site measurement. We’ll bring finish samples, review glass options for your exposure, and deliver a written line-item quote with no pressure and no change-order surprises. Projects start with a conversation. Let’s talk.

Written by the team at Sightline Windows & Doors Sunrise, serving Sunrise, FL since 2019.