ES Windows Custom & Geometric Windows Nationwide | Sightline Windows & Doors Sunrise

ES Windows Custom & Geometric Windows in Sunrise: What to Know First

We install and service ES Windows custom and geometric windows in Sunrise as an independent ES Windows service provider, with most measured surveys scheduled within two business days and written quotes delivered before any work begins. Typical custom ES Windows installations run three to six weeks from signed quote to final inspection, depending on the complexity of the shape and the permit timeline with the City of Sunrise Building Department. Our pricing starts around $1,800 for a standard geometric replacement and scales from there based on the specific ES Windows series, the glazing package, and whether the opening requires structural modification. If you own an ES Windows product and need a shaped, arched, or oversized unit measured correctly the first time, call us at (754) 254-5294 to schedule your free measured survey.

Call (754) 254-5294

How ES Windows Products Fail - and How We Fix Them

• ES Windows ES-5000 series fixed geometric units: The thermal break in the extrusion can separate at the miter joints of trapezoid and pentagon shapes after five to seven years in Sunrise’s salt-air exposure, especially on east-facing elevations. We see this in the Welleby and Sawgrass Estates areas where the morning sun hits hard and the afternoon storms drive moisture into the gap. We remove the unit, re-fabricate the corner with a fresh thermal break insert, and re-bed the glazing with Dow Corning 795 to match the original OEM spec.
• ES Windows ES-8000 impact-rated arched tops: The curved aluminum extrusion creates a stress concentration at the springline where the arch meets the jamb, and we’ve found the factory gusset plate undersized on units over 48 inches wide. In Sunrise, where the 175 mph wind-load requirement governs, that flex shows up as corner seal failure after major storm events. We sister a heavier-gauge gusset behind the original and reseal with a wet-glaze bead that meets Miami-Dade NOA standards.
• ES Windows custom circle-top insulators: The spacer bar in true-radius units can migrate during shipping from ES Windows’ Doral facility, creating a visible sightline misalignment that the homeowner notices before the installer does. We catch this during our pre-installation inspection - if the sightline deviation exceeds 1/16 inch, we reject the unit and reorder rather than shim it into place. Measure it right once, and the install tells you nothing went wrong.
• ES Windows oversized fixed picture units: Units over 60 by 96 inches often arrive with inadequate temporary bracing for the IGU, and the glass can shift in the sash before installation. We’ve documented this on three jobs in Sunrise’s Inverrary neighborhood since 2019. Our fix is a field verification of the IGU position against the sightline drawing before the unit leaves our truck, with shimming to center if the factory bracing failed.
• ES Windows geometric venting units (hopper and awning shapes): The hardware mortise in non-rectangular sashes is machined to a template that doesn’t always account for the actual angle of the sill, so the operator arm binds or the sash drifts. We measure the as-built angle on site, re-machine the mortise with a custom jig, and install the correct arm geometry for the actual swing path.

Our ES Windows Custom & Geometric Windows Process

1. 1
   Measured survey. Sonia Raman or a senior tech visits with a laser measure, level, and the ES Windows sightline drawings for the specific series. You keep the measured survey document; we keep the copy that becomes your quote.
2. 2
   Diagnosis and series verification. We confirm the exact ES Windows model, the glazing package, and any NOA documentation required for Sunrise’s HVHZ compliance. If the original label is missing, we identify the extrusion profile by sight and measure.
3. 3
   Parts decision: OEM or verified equivalent. For ES Windows units still in production, we quote OEM sashes, IGUs, and hardware. For discontinued series, we source verified aftermarket components that match the thermal and structural performance - never a guess.
4. 4
   Written quote with fixed price. Haven Clause 1: the price on the page is the price on the invoice. No change orders for conditions we could have seen at survey.
5. 5
   Installation and live testing. We set the unit, check operation, verify the sightline alignment, and photograph the completed work for your record and ours.
6. 6
   365-Day Done Right Promise activation. The documented photo record and your signed completion sheet trigger the Haven Standard warranty. If it’s not done right, we make it right - written, not verbal.

Before

After

What ES Windows Custom & Geometric Windows Costs in Sunrise

What moves the price: the ES Windows series (non-impact vs. impact-rated), the glazing package (single-pane IGU vs. laminated impact glass vs. Low-E with argon), the shape complexity (true radius costs more than segmented), and whether the rough opening needs reframing to meet current Sunrise code. Permits and inspections run $180-$420 and are itemized separately.

Call (754) 254-5294 for your exact written quote - estimates are free, and we review competitor estimates at no charge under our Free Second Opinion policy.

Why Sunrise Homeowners Call Sightline Windows & Doors Sunrise for ES Windows Work

We’ve installed and serviced ES Windows products in Sunrise since 2012, and we’ve learned where the series-specific tolerances live. When an ES-8000 arched unit doesn’t quite seat in the rough opening, we know whether the issue is the extrusion, the IGU shift, or the framing - because Sonia Raman has pulled enough of these units out of walls to read the tell in the bedding bead pattern.

Our Haven Standard governs every job: written price before work starts, background-checked uniformed techs with license numbers provided in advance, documented photo records, and the 365-Day Done Right Promise stamped on every completion sheet. If ES Windows lead times stretch or a series discontinues, we specify from our other seven manufacturer lines - PGT, CGI, CWS, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - matched to the opening’s performance requirements, not our inventory.

Calls are answered by a live person, 24/7. No callback window, no voicemail queue.

FAQs