Therma-Tru Windows & Doors Service Nationwide | Sightline Windows & Doors Sunrise

Why Sunrise Homeowners Choose Therma-Tru Windows & Doors

We provide independent Therma-Tru Windows & Doors in Sunrise, FL, specializing in fiberglass entry door repair, impact-rated glass replacement, and multipoint hardware realignment for the product lines that were installed across Broward County’s 1970s-1980s housing stock. Our work is governed by the Haven Standard, which means every Therma-Tru job begins with a measured survey you keep and ends with a documented photo record - the same document at both ends, no drift. Call (754) 254-5294 to schedule your free estimate.

Call (754) 254-5294

Therma-Tru’s fiberglass door technology arrived in South Florida at the right moment. The Smooth-Star, Fiber-Classic, and Pulse series doors offered rot-resistant slabs and factory finishes that outlasted steel in humid, salt-laden air. But Sunrise’s specific conditions - intense UV on south and west exposures, periodic salt-laden wind, and the original aluminum-framed single-pane windows that still dominate communities like Sunrise Lakes and Inverrary - create failure modes that a national product page won’t describe. We’ve worked on Therma-Tru doors in Sunrise since 2012, and we’ve learned how their fiberglass behaves when it’s baked for a decade under afternoon sun and then hit by a summer storm.

We are not affiliated with or authorized by Therma-Tru. We are an independent service provider who works on their products every week, stocks OEM-compatible parts locally, and makes repair-versus-replace calls based on what we find in your frame, not on a sales quota.

Why Trust Sightline Windows & Doors Sunrise for Your Therma-Tru Windows & Doors?

Sonia Raman, who leads our operation, grew up in Miami and learned glazing at Miami Dade College’s Kendall Campus, working through fabrication and installation before she ever wrote her own quote. She has spent well over a decade measuring and setting windows and doors across Sunrise, including impact-rated our Window Installation services with Therma-Tru in Inverrary where rough opening tolerances and unit specs must be reconciled on paper before the first fastener goes in. That discipline keeps callbacks low and inspection sign-offs clean. She tracks Broward County weather data on weekends because the gap between a correctly bedded frame and a leaking one shows up the first time a named storm runs up the coast.

Our technicians are background-checked, uniformed, and identified by license number before arrival - Haven Clause 3, Verified Crews. We carry OEM Therma-Tru replacement hardware, weatherstrip, sills, and glass units when available, and high-quality aftermarket equivalents when OEM lead times or pricing make them impractical. For impact-rated Therma-Tru configurations, we verify that any replacement glass meets the same design pressure rating as the original unit, because Broward County enforces 140+ mph wind-load compliance on every permitted replacement.

The 365-Day Done Right Promise is stamped on every job, not offered as a courtesy. If the multipoint lock drags after we leave, or the threshold leaks in the next storm season, we make it right. Measure it right once, and the install tells you nothing went wrong.

Common Therma-Tru Windows & Doors Problems We Fix in Sunrise

• Fiberglass slab finish failure on south- and west-facing doors. The factory gel coat on Smooth-Star and Fiber-Classic slabs blisters, chalks, or peels after years of intense UV and salt air exposure. In Sunrise, where many homes were built with minimal overhang protection, we’ve pulled doors where the finish has completely degraded on the weather side while the shaded side looks new. We assess whether the fiberglass substrate is intact - if so, we can refinish rather than replace.
• Multipoint lock and handle set misalignment. Therma-Tru’s multipoint hardware is precise, which means it goes out of alignment when the door sags or the frame shifts. The latch bolts miss their strikes, the handle grows stiff, and eventually the door drags on the sill. In Sunrise’s CBS construction, frame movement is less common than in wood framing, but we’ve seen it repeatedly where the original rough opening was shimmed poorly during a 1980s build or a previous replacement. We diagnose whether the issue is hardware wear, frame settlement, or both.
• Threshold and sill water intrusion. The bottom rail of a Therma-Tru door takes water when the sill pan is compromised or the weatherstrip hardens. In Sunrise’s high-humidity climate, threshold seals crack and separate faster than in drier inland areas. We’ve found rotted sills beneath apparently sound doors in Sunrise Lakes units where the association’s maintenance deferred replacement for five years. The interior water stains are often the last symptom, not the first.
• Impact-rated glass and sidelite seal failure. Therma-Tru’s Tru-Defense impact configurations use laminated glass that can haze or fog when the edge seal fails. This reduces visibility and, more critically, compromises the hurricane performance the glass was certified for. We see this in Sunrise on doors installed 10-15 years ago, where the original glazing tape has aged out and the IG unit’s desiccant is saturated.
• Frame and sidelite separation from stucco openings. In Sunrise’s 1970s-1980s CBS homes, the original aluminum door frames were often set with minimal fastening and caulked to the stucco skin. When a Therma-Tru replacement was installed without proper anchoring to the block, the frame can shift under wind load or thermal cycling. We document the fastening pattern during our survey and specify the correct Tapcon or expansion anchor schedule for the block condition we find.

Before

After

Therma-Tru Parts & Our Repair-vs-Replace Approach

We stock OEM Therma-Tru multipoint locks, handles, hinges, weatherstrip, and sills at our local facility for the Smooth-Star, Fiber-Classic, Profiles, and Pulse series. For impact glass replacement, we source laminated units that match the original design pressure rating, whether from Therma-Tru’s supply chain or from verified aftermarket manufacturers with Miami-Dade or Florida Product Approval documentation.

Our default position is repair and re-finishing over full replacement. A Fiber-Classic door with a peeling finish but sound fiberglass substrate gets sanded, primed, and refinished with a factory-matched coating. A Pulse series door with a leaking threshold gets a new sill pan, weatherstrip, and hardware realignment. We only recommend full door replacement when the slab is delaminated, the frame is structurally compromised, or the impact glazing cannot be matched to the original certification. You’ll get that recommendation in writing, with the reason, before any work starts. Call (754) 254-5294 for a free estimate and we’ll show you what we found.

Our Therma-Tru Service Process - Step by Step

1. 1
   Measured survey and diagnosis. We document your door’s series, size, handing, frame condition, and hardware type. We check the rough opening with a level and tape, note the stucco-to-frame gap, and photograph any water damage or finish failure. You keep the measured survey.
2. 2
   Written scope and price. The quote references the exact Therma-Tru parts or compatible equivalents we will use, the finishing schedule if applicable, and the permit requirement if the job involves impact-rated glass replacement. The price on this document is the price on the final invoice - Haven Clause 1.
3. 3
   Repair or installation. For repairs, we remove the door if needed, replace failed components with OEM or verified aftermarket parts, and re-bed the frame with proper sealant and anchoring. For new Therma-Tru installations, we set the unit plumb and square, verify the multipoint lock engagement at all points, and test the sweep and weatherstrip compression.
4. 4
   Testing and documentation. We cycle the door 20 times, check the lock alignment with the door both closed and under slight pressure, and verify threshold drainage. We photograph the completed work, including the fastener pattern and sealant bead, and provide you the photo record.
5. 5
   Warranty and follow-up. The 365-Day Done Right Promise covers labor and parts. We leave the written warranty with the job documentation, and our phone is answered live 24/7 if you need us.

Therma-Tru Products We Service & Install in Sunrise

We work on the full Therma-Tru residential entry door line: Smooth-Star fiberglass doors in standard and custom sizes; Fiber-Classic and Fiber-Classic Oak Collection with woodgrain finishes; Profiles and Pulse series contemporary and traditional door systems; and Tru-Defense impact-rated door and sidelite configurations with laminated impact glass. We stock hardware, weatherstrip, and sills for these series locally, and we can source factory-matched finishes for refinishing work. For homeowners in Sunrise Lakes, Inverrary, and other Broward communities with association architectural review, we pre-submit the product cut sheets and finish samples to avoid the multi-week delays that cost less prepared contractors the job.

We Also Service These Brands

Our eight manufacturer lines give us perspective on what each product does best. We also service and install PGT, CGI, CWS, and ES Windows impact and energy-efficient products, plus ECO Window Systems, Mr-Glass, and ViewLux. We specify by what the opening requires, not by what is in stock.

FAQs - Therma-Tru Windows & Doors Service in Sunrise

Is Sightline Windows & Doors Sunrise authorized by Therma-Tru?

No. We are an independent service provider with no affiliation or authorization from Therma-Tru. We work on their products based on field experience, OEM parts knowledge, and factory specification documentation, not on a dealer agreement. This independence lets us recommend repair over replacement when it is the honest call.

Can you replace just the glass in my Therma-Tru entry door, or do I need a whole new door?

In most cases, we can replace just the glass. Therma-Tru entry doors use removable glass frames or direct-glazed inserts depending on the series. We source laminated impact-rated glass that matches the original design pressure rating, install it with fresh glazing tape and setting blocks, and certify the assembly for Broward County permit inspection if required. Full door replacement is only necessary if the slab or frame is structurally compromised. Call (754) 254-5294 and we’ll tell you which situation applies to your door.

My Therma-Tru door is sticking and the lock won’t line up - is that a frame or hardware problem?

Usually both, in sequence. The multipoint lock hardware goes out of alignment when the door sags or the frame shifts, but the hardware wear then accelerates the damage. We check the hinge screw engagement in the frame, the strike plate alignment at each locking point, and the door’s plumb in the opening. In Sunrise’s older CBS homes, we’ve found that previous installers sometimes used wood screws into plastic anchors instead of proper masonry fasteners, and the frame slowly rotates under load. We correct the root cause, not just the symptom.

Do you install impact-rated Therma-Tru doors that meet Broward County hurricane requirements?

Yes. We install Tru-Defense impact-rated configurations and verify that the glass, frame, and hardware assembly carries current Florida Product Approval or Miami-Dade Notice of Acceptance for the wind-borne debris and pressure requirements of Broward County’s high-velocity hurricane zone. We pull the permit and schedule the inspection. The 140+ mph design wind-load compliance is non-negotiable here, and we document the rating on every job.

How often should a Therma-Tru fiberglass door be refinished in Sunrise?

Every 3-5 years for south- and west-facing doors with minimal overhang, and every 5-7 years for shaded or protected exposures. Sunrise’s UV intensity and salt-laden air degrade finishes faster than inland Florida climates. We inspect the gel coat for chalking and micro-checking during our survey; catching it before the substrate is exposed prevents the costly delamination that requires slab replacement. The refinishing schedule goes in your written scope if we find early wear.

Can you repair a leaking Therma-Tru door threshold without replacing the whole door?

Yes, in the majority of cases. We remove the door, replace the sill pan and composite or aluminum sill, install new weatherstrip and door-bottom sweep, and re-align the door in the frame. We did exactly this for a homeowner in Sunrise with a Fiber-Classic door that was sticking, leaking at the threshold, and showing a peeling bottom rail after years of afternoon sun and rain. Our crew replaced the rotted sill and weatherstrip, re-aligned the multipoint lock, and installed a new impact-rated glass insert with a factory-matched finish. The door now closes with one hand, stays dry through summer storms, and matches the existing stucco opening without a full frame replacement.

Book Your Therma-Tru Service in Sunrise, FL

Call (754) 254-5294 to schedule your free estimate. We’ll bring the measured survey, name the price in writing before any work starts, and leave you with the documented photo record when the job is done. Haven Clause 1: the measurement and the quote are the same document. That’s been true for every one of our 18,000+ openings since 2012.

Written by Sonia Raman, Owner at Sightline Windows & Doors Sunrise, serving Sunrise since 2012.