VLX 80 Awning Window

VLX 80 Awning Window in Sunrise, FL | Sightline Windows & Doors Sunrise

The VLX 80 Awning Window is a top-hinged aluminum window built for homeowners who want fresh air without worrying about Florida’s sudden downpours. At Sightline Windows & Doors Sunrise, we’re an authorized ViewLux installation partner, which means every unit we sell carries full manufacturer backing and is installed to the exact standards that keep that warranty intact. Sunrise homeowners call us when they’re replacing outdated single-pane windows, upgrading a patio enclosure, or finishing a new addition near Sawgrass Mills or the Flamingo Road corridor. The VLX 80’s thermal break construction and rain-safe ventilation design make it particularly popular here, where summer humidity hangs heavy and afternoon storms roll in fast. Call (754) 254-5294 to schedule your free on-site measurement and written quote.

Call (754) 254-5294

Product Overview - VLX 80 Awning Window

The VLX 80 is a top-hinged aluminum awning window that opens outward from the bottom, creating a protective roof effect when cracked open during light rain. That hinge geometry matters in Sunrise more than most places. Our subtropical climate means afternoon thunderstorms from May through October, yet homeowners still want airflow. Traditional sliding windows need to close at the first drop. The VLX 80 doesn’t.

ViewLux engineers this series around a thermally broken aluminum frame. The thermal break is a polyamide barrier cast between interior and exterior aluminum extrusions, interrupting the heat bridge that makes old aluminum windows sweat and bake. In Sunrise, where attic temperatures can push 140°F and exterior walls absorb hours of direct sun, that break translates to real comfort and measurable cooling savings.

The frame’s proportions suit both contemporary and transitional architecture common in Sunrise neighborhoods. We’ve installed the VLX 80 in everything from 1980s ranch updates near Welleby to new construction west of the Sawgrass Expressway. The slim sightlines preserve glass area, so rooms feel open rather than boxed in. The 0.079″ wall thickness and 1.97″ profile width strike a balance: sturdy enough for large openings, refined enough for detailed elevations. Hardware is concealed within the frame, maintaining clean lines inside and out.

Technical Specifications

• Frame Construction: Aluminum extrusion with integrated thermal break, 0.079″ wall thickness, 1.97″ profile width
• Operating Style: Top-hinged awning, outward opening, multi-point locking hardware
• Glass Options: Clear standard; Frosted for privacy; Low-E for solar heat gain control; Tempered for safety-critical locations; Laminated for impact resistance and sound dampening
• Finish Options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood grain
• Screen Options: Fixed fiberglass screen; Retractable screen for unobstructed views when not needed
• Sill Design: Sloped exterior sill with integral drainage channels
• Performance Ratings: NFRC-certified thermal performance; AAMA 2400/2410 installation compliance; tested airtightness, water penetration resistance, and structural load ratings

Before

After

Performance Features

Thermal Efficiency

The polyamide thermal break in the VLX 80 frame achieves NFRC-rated U-factors that outperform non-thermally-broken aluminum by a wide margin. In Sunrise, where air conditioning runs eight months a year, that means your compressor works less and your utility bill reflects it. Low-E glass options further tune solar heat gain coefficient for east- and west-facing walls that take the brunt of morning and afternoon sun.

Acoustic Performance

Laminated glass construction adds mass and a damping interlayer that disrupts sound waves. For homes near the Sawgrass Expressway, Sunrise Boulevard, or flight paths into Fort Lauderdale-Hollywood International, that translates to quieter bedrooms and less intrusive traffic noise. Even standard configurations outperform single-pane replacements by a significant margin.

Airtightness & Weather Seal

Multi-point compression locks pull the sash firmly against dual weatherstrip barriers. The design meets AAMA 2400/2410 standards for air infiltration, meaning conditioned air stays inside where you paid to cool it. During our installation process, we verify seal continuity at every corner and miter joint.

Waterproofing

The sloped sill and integrated drainage system shed water outward, while the top-hinge geometry prevents direct water intrusion even when the window is open in light rain. We supplement this with AAMA 812 low-expansion foam sealant at all perimeter joints, creating a secondary moisture barrier between frame and rough opening.

Wind Resistance

The VLX 80 is wind-load rated for South Florida’s design pressures, including the hurricane-prone zone requirements that apply in Broward County. Laminated glass options satisfy Florida Building Code impact standards for designated wind-borne debris regions. We’ve specified these for homes throughout Sunrise where code compliance is non-negotiable.

Security & Hardware

Concealed multi-point locking hardware engages at multiple locations along the sash edge, resisting forced entry better than single-point latches. The aluminum frame’s 0.079″ wall thickness provides structural integrity that thinner extrusions cannot match. Hardware finishes are matched to the frame for visual consistency.

Color & Glass Options

Six finishes let the VLX 80 integrate with virtually any Sunrise home exterior. Premium Black and Anodized Silver dominate our contemporary installations, particularly on homes with dark trim packages or metal accent roofs. Pure White remains the standard for traditional stucco exteriors and HOA communities where uniformity matters. Bronze and Champagne warm up Mediterranean-influenced architecture common in older Sunrise subdivisions. Teak Wood grain finish satisfies deed restrictions that require wood appearance without the maintenance burden of actual timber in our humidity.

Glass selection should match the room’s function and exposure. Clear glass maximizes visible light transmission for north-facing rooms or shaded courtyards. Frosted works for bathrooms and side-yard locations where privacy trumps the view. Low-E coatings are our default recommendation for west and south walls in Sunrise, where solar heat gain drives cooling load. Tempered glass is code-required for windows near doors, stair landings, and wet areas. Laminated glass serves double duty: impact protection for hurricane zones and sound control for busy streets. We’ll walk you through the tradeoffs during your free estimate.

Installation by Sightline Windows & Doors Sunrise in Sunrise

Window performance lives or dies at installation. We’ve replaced too many units in Sunrise where the product was adequate but the installation was not. Gaps in sealant, out-of-square frames, and missing shims create air leaks, water intrusion, and eventually mold. Worse, improper installation voids the ViewLux manufacturer warranty entirely, leaving you with no recourse when problems emerge.

Our process starts with a pre-install inspection of every rough opening. We check for level sill plates, plumb jambs, and square corners. If the framing is off, we correct it before the window goes in. The VLX 80 is set on composite shims, leveled, plumbed, and squared to within 1/16″ across the diagonal. Fasteners are placed per AAMA 2400/2410 standards, never over-tightened to distort the frame.

Perimeter sealing receives AAMA 812 low-expansion foam sealant at all frame-to-rough-opening joints. This foam remains flexible, accommodating the thermal expansion and contraction that aluminum experiences across Sunrise’s 40-degree annual temperature swings. We cap the foam with compatible sealant for UV protection. After installation, we run a water test, checking every corner and sill joint for penetration.

Cleanup and protection finish the job. We remove old windows and debris from your property. New units are protected from construction damage if your project is ongoing. Final walkthrough confirms smooth operation, lock engagement, and screen fit.

Sunrise’s location in Broward County means we pull permits and schedule inspections where required by local building code. Our installations are documented for warranty submission, so your ViewLux coverage remains intact.

Frequently Asked Questions - VLX 80 Awning Window

Get a Quote - VLX 80 Awning Window in Sunrise

Ready to see how the VLX 80 Awning Window fits your Sunrise home? Call (754) 254-5294 to schedule your free on-site measurement. We’ll bring finish samples, explain your glass options, and deliver a written line-item quote with no pressure to decide on the spot. Every project starts with accurate information and ends with installation you can trust.

Written by the team at Sightline Windows & Doors Sunrise, authorized ViewLux installation partner serving Sunrise, FL and surrounding Broward County communities.