Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Coral Springs, FL
Window and door installation in Coral Springs runs $650-$2,800 per opening depending on product tier, with most complete home retrofits falling between $8,500 and $28,000 for the area’s typical 12-20 opening count. Every replacement here must carry a current Miami-Dade Notice of Acceptance for impact resistance under Florida Building Code, even 30 miles inland, because Coral Springs sits in Broward County’s High-Velocity Hurricane Zone. We measure every opening on-site, record the frame dimensions and sightline readings, and hand you a written price before any work begins - call (754) 254-5294 to schedule your measured survey.
Why Coral Springs Homes Are Different
Coral Springs was developed as a master-planned community starting in 1963, with the heaviest build-out from the mid-1970s through the early 1990s. That leaves a dominant stock of concrete-block single-family homes with original aluminum-frame, single-pane windows and large sliding glass doors that predate the post-Hurricane Andrew impact-glazing code overhaul of 1992. Any permitted opening replacement triggers full HVHZ compliance, so a single failing window often compels a whole-house upgrade discussion.
The city’s active building department and dense HOA landscape create a dual-approval sequence that catches out crews accustomed to coastal municipalities alone. A Coral Springs impact window job requires both a city permit referencing a valid Miami-Dade NOA product number and a separate HOA architectural review if frame color or style changes. That parallel track can add weeks, and we build that timeline into every written scope. Meanwhile, South Florida’s humidity oxidizes the original aluminum frames and degrades glazing seals, but the deeper driver here is regulatory: Broward’s HVHZ classification imposes Miami-Dade-level impact standards countywide, making the climate issue as much code-driven as meteorological.
Our Main Coral Springs Services
These are the three services Coral Springs homeowners call about most often, each with its own dedicated page for deeper product and pricing detail.
Window Replacement in Coral Springs
Most calls we get from Coral Springs involve replacing the original aluminum single-pane windows in 1970s-1990s planned-community homes with impact-rated vinyl or aluminum systems that satisfy current HVHZ requirements and lower insurance premiums. We specify PGT, CGI, or CWS products by performance tier and price range, not by margin, and every quote references a valid Miami-Dade NOA. Read more about Window Replacement in Coral Springs.
Impact Windows & Doors in Coral Springs
Florida carriers are canceling or surcharging policies on homes that cannot document impact-rated openings, making HVHZ compliance upgrades the primary sales conversation on virtually every job here. We install impact windows and doors across eight manufacturer lines, each with current NOA documentation, and we handle both city permitting and HOA architectural review as part of the written scope. Read more about Impact Windows & Doors in Coral Springs.
Sliding & Patio Doors in Coral Springs
The large sliding glass doors common in Coral Springs’s older stock are frequent failure points: corroded rollers, failed weatherstripping, and non-impact glazing that no longer meets code or insurance requirements. We measure the rough opening and sightline clearances, specify replacement systems from PGT, CGI, or ES Windows with valid NOA numbers, and pull the permit through Coral Springs’s building department. Read more about Sliding & Patio Doors in Coral Springs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Coral Springs
Window installation in Coral Springs means navigating HVHZ compliance on nearly every job, because the city’s 1970s-1990s housing stock predates the impact-glazing codes that now govern all replacements. Original aluminum single-pane windows with failed seals and oxidized frames are the norm in neighborhoods like Ramblewood South and Coral Springs Country Club, and a single permitted replacement triggers full compliance requirements that often expand to the whole house. We begin every engagement with a measured survey you keep, specify products from PGT, CGI, CWS, ES Windows, ECO Window Systems, or Mr-Glass by what the opening requires, and deliver a written price that matches the survey document. Learn more about our Window Installation process.
Single & Double Hung Windows
Signs you need it
Your sashes stick or fall, the aluminum frame shows white oxidation, or you feel air movement around the closed sash edges.
What it costs in Coral Springs
Single and double hung window installation in Coral Springs typically runs $650-$1,400 per opening for vinyl impact-rated units and $1,100-$2,200 for aluminum impact systems.
How we do it
We record the existing frame dimensions and sightline measurements, verify the structural opening for HVHZ anchoring requirements, install the new unit with Miami-Dade NOA-matched fasteners, and seal with backer rod and sealant per the product approval.
Horizontal Roller Windows
Signs you need it
The sash rolls unevenly or jumps track, the lock no longer engages the keeper, or you see daylight through the closed meeting rail.
What it costs in Coral Springs
Horizontal roller window installation in Coral Springs typically runs $750-$1,550 per opening for vinyl impact-rated units and $1,200-$2,400 for aluminum impact systems.
How we do it
We measure the existing roller pocket depth and sill slope, specify a replacement unit with matching NOA fastener pattern, install with corrosion-resistant screws into the CBS substrate, and test operation and lock engagement before sealing.
What Window Installation Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Single/double hung vinyl impact window | $650 - $1,400 |
| Single/double hung aluminum impact window | $1,100 - $2,200 |
| Horizontal roller vinyl impact window | $750 - $1,550 |
| Horizontal roller aluminum impact window | $1,200 - $2,400 |
| Complete home retrofit (12-20 openings) | $8,500 - $28,000 |
Do I need impact-rated windows if I live inland in Coral Springs?
Yes. Broward County’s High-Velocity Hurricane Zone classification applies countywide, so every replacement window in Coral Springs must carry a current Miami-Dade NOA for impact resistance regardless of distance from the coast. Call (754) 254-5294 and we’ll verify the NOA on your written estimate.
Will my HOA approve the window style I want?
Most Coral Springs HOAs require separate architectural review for frame color or style changes, which we note in your written scope and timeline. We provide the Miami-Dade NOA documentation and product data sheets your HOA needs as standard evidence on every job.
Door Installation in Coral Springs
Door installation in Coral Springs faces the same HVHZ compliance pressure as windows, with the added complexity that entry doors are both security-critical and highly visible to HOA review boards. The original hollow-core or non-impact fiberglass doors on 1970s-1990s homes, plus the non-impact sliding glass doors that dominate the rear elevations, fail current code and increasingly fail insurance documentation requirements. We measure the rough opening and sightline clearances, specify Therma-Tru, PGT, or CGI systems with valid NOA numbers, and pull the permit through Coral Springs’s building department as part of the written scope. Learn more about our Door Installation process.
Entry Doors
Signs you need it
The door slab delaminates or warps, the jamb shows rot at the sill, or the deadbolt no longer seats squarely in the strike.
What it costs in Coral Springs
Entry door installation in Coral Springs typically runs $1,200-$2,800 for fiberglass impact-rated units and $2,200-$4,500 for aluminum impact systems with sidelite configurations.
How we do it
We measure the rough opening plumb and level, specify a Therma-Tru or PGT impact-rated unit with matching NOA, install with HVHZ-compliant fasteners into the CBS substrate, and adjust lockset and weatherstripping before final documentation.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your insurance carrier has requested impact-rated opening documentation, or your existing door lacks a Miami-Dade NOA and you are replacing it under permit.
What it costs in Coral Springs
Hurricane-proof front door installation in Coral Springs typically runs $1,800-$3,500 for single units and $3,200-$5,800 for double-door or sidelite configurations.
How we do it
We verify the existing frame can accept the impact-rated unit’s fastening pattern, specify a CGI or PGT system with current NOA, install with through-bolting into the concrete block, and provide the documentation your insurance and building department require.
What Door Installation Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Fiberglass impact entry door | $1,200 - $2,800 |
| Aluminum impact entry door with sidelites | $2,200 - $4,500 |
| Hurricane-proof single front door | $1,800 - $3,500 |
| Hurricane-proof double door with sidelites | $3,200 - $5,800 |
| Sliding glass door replacement (impact-rated) | $2,500 - $5,500 |
Do I need a permit to replace my front door in Coral Springs?
Yes. Any exterior door replacement in Coral Springs requires a building permit referencing a product with a current Miami-Dade NOA, and most HOAs require separate architectural review. We handle both tracks as part of your written scope.
Can I keep my existing frame and just replace the door slab?
Usually no. HVHZ compliance requires the entire assembly - frame, slab, and hardware - to match the tested and approved system in the NOA, so we measure and replace the full unit to maintain code and warranty validity.
Energy-Efficient Windows in Coral Springs
Energy-efficient window installation in Coral Springs addresses a specific failure mode of the area’s 1970s-1990s housing stock: single-pane aluminum windows that conduct heat, leak cooled air, and drive utility bills well above what modern glazing can deliver. The same humidity that oxidizes frames also degrades the marginal seals on early dual-pane units, and the intense solar gain through west- and south-facing openings in neighborhoods like Eagle Trace and Kensington strains even properly sized HVAC systems. We specify low-E and argon-gas systems from PGT, CWS, or ECO Window Systems with SHGC and U-factor ratings matched to each exposure, and the written quote includes the projected performance change. Learn more about our Energy-Efficient Windows options.
Low-E & Argon Gas Glass
Signs you need it
Your west-facing rooms spike 8-12 degrees above the thermostat setpoint, or you feel radiant heat through the glass even when the window is closed.
What it costs in Coral Springs
Low-E and argon gas glass installation in Coral Springs typically adds $80-$180 per opening above base impact glazing, or $730-$1,680 per window for complete vinyl impact units with low-E/argon specified.
How we do it
We record each opening’s compass orientation and shading profile, specify PGT or CWS low-E coatings by SHGC target, and verify argon fill retention at delivery before installation.
ENERGY STAR Replacement Windows
Signs you need it
Your FPL bill runs 30-50% above comparable homes in your Coral Springs neighborhood, or your air conditioner cycles continuously on summer afternoons.
What it costs in Coral Springs
ENERGY STAR replacement window installation in Coral Springs typically runs $850-$1,750 per opening for vinyl impact systems and $1,400-$2,600 for aluminum impact systems with qualifying U-factor and SHGC ratings.
How we do it
We audit the existing glazing performance, specify ECO Window Systems or PGT units that meet South Florida ENERGY STAR criteria, and document the U-factor and SHGC values on your written scope for utility rebate verification.
What Energy-Efficient Windows Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Low-E/argon upgrade (add to base impact window) | $80 - $180 per opening |
| Complete vinyl impact window with low-E/argon | $730 - $1,680 |
| ENERGY STAR vinyl impact window | $850 - $1,750 |
| ENERGY STAR aluminum impact window | $1,400 - $2,600 |
| Whole-home energy-efficient retrofit (12-20 openings) | $10,500 - $32,000 |
Will energy-efficient windows lower my FPL bill in Coral Springs?
Most Coral Springs homeowners see 15-25% cooling cost reduction after replacing single-pane aluminum with low-E/argon impact systems, with west-facing openings showing the largest improvement. Call (754) 254-5294 for a measured survey that includes exposure-specific performance projections.
Do energy-efficient windows still meet HVHZ requirements?
Yes. Every energy-efficient unit we specify carries a current Miami-Dade NOA for impact resistance; the low-E coating and argon fill are added to compliant glazing packages, not substituted for them.
Impact Garage Doors in Coral Springs
Impact garage door installation in Coral Springs is increasingly driven by insurance documentation requirements rather than storm damage alone, because carriers are treating garage doors as critical envelope openings that must demonstrate HVHZ compliance. The original non-impact steel or aluminum doors on 1970s-1990s homes lack the wind-load rating and debris-impact resistance now required, and a failed garage door in a hurricane creates internal pressurization that can compromise the entire roof structure. We specify wind-load-rated systems from Mr-Glass or PGT with Miami-Dade NOA documentation, measure the opening for proper track anchoring into the CBS header, and include the permit and inspection in the written scope. Learn more about our Impact Garage Doors process.
Hurricane-Rated Garage Doors
Signs you need it
Your insurance carrier has requested garage door impact documentation, or your existing door lacks a visible wind-load sticker and Miami-Dade NOA number.
What it costs in Coral Springs
Hurricane-rated garage door installation in Coral Springs typically runs $2,200-$4,500 for single-car openings and $3,800-$6,500 for double-car openings with impact-rated glazing or solid panel systems.
How we do it
We measure the opening width, height, and header depth, specify a Mr-Glass or PGT wind-load-rated door with matching track and spring system, anchor the track with HVHZ-compliant fasteners into the concrete block, and document the NOA and installation photos for your insurance file.
Wind-Load Code Compliance
Signs you need it
You are replacing your garage door under permit in Coral Springs, or your HOA has cited the existing door for non-compliance with current architectural standards.
What it costs in Coral Springs
Wind-load code compliance garage door installation in Coral Springs typically runs $2,800-$5,200 for single-car openings and $4,500-$7,800 for double-car openings with full track replacement and permit coordination.
How we do it
We verify the existing header and jamb can accept the new wind-load-rated door’s track reaction forces, pull the Coral Springs building permit with the NOA-submitted product data, install with engineered fastening, and schedule the required inspection as part of your written timeline.
What Impact Garage Doors Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Hurricane-rated single-car garage door | $2,200 - $4,500 |
| Hurricane-rated double-car garage door | $3,800 - $6,500 |
| Wind-load code compliance single-car (with permit) | $2,800 - $5,200 |
| Wind-load code compliance double-car (with permit) | $4,500 - $7,800 |
| Garage door opener replacement (impact-compatible) | $450 - $950 |
Does my garage door need to be impact-rated if it’s not facing the street?
Yes. Broward County’s HVHZ classification requires impact-rated garage doors on all exposures regardless of orientation; the wind-borne debris threat is not directional, and internal pressurization from a failed door endangers the whole structure.
Will you pull the permit for my garage door replacement?
Yes. We pull the Coral Springs building permit, submit the Miami-Dade NOA product documentation, and coordinate the required inspection as standard items in your written scope - not as add-ons.
Custom & Geometric Windows in Coral Springs
Custom and geometric window installation in Coral Springs solves a specific problem created by the city’s 1970s-1990s planned-community architecture: builders used octagonal, arched, and trapezoidal windows as signature elements in entryways and stairwells, but the original units are single-pane, non-impact, and often built to dimensions no longer stocked. Replacing these openings requires custom fabrication with Miami-Dade NOA approval, not field modification of standard rectangles, and the HOA architectural review is especially strict on visible specialty shapes. We measure each custom opening with sightline and radius templates, specify ViewLux or PGT custom geometric systems with current NOA documentation, and build the longer lead time into your written timeline. Learn more about our Custom & Geometric Windows process.
Geometric & Shaped Windows
Signs you need it
Your octagonal, trapezoidal, or triangular window has fogged between panes, the frame has separated at the miter joints, or you need impact compliance on a shape that standard catalogs do not list.
What it costs in Coral Springs
Geometric and shaped window installation in Coral Springs typically runs $1,400-$3,200 per opening for vinyl impact-rated custom units and $2,200-$4,800 for aluminum impact systems with complex miter or radius construction.
How we do it
We template the existing opening with radius gauges and sightline measurements, submit the geometry to ViewLux or PGT custom fabrication with NOA verification, and install with HVHZ-compliant anchoring at each miter joint and structural point.
Arched & Curved Windows
Signs you need it
The radius top of your arched window has cracked or separated from the rectangular base unit, or the original arched unit lacks impact rating and must be replaced under permit.
What it costs in Coral Springs
Arched and curved window installation in Coral Springs typically runs $1,800-$3,800 per opening for vinyl impact-rated custom radius units and $2,800-$5,500 for aluminum impact systems with true divided lite or simulated divided lite options.
How we do it
We record the spring-line height, radius, and chord width, specify a PGT or ViewLux arched unit with matching NOA fastener pattern for the combined assembly, and coordinate the custom lead time with your written project schedule.
What Custom & Geometric Windows Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Geometric/shaped vinyl impact window (custom) | $1,400 - $3,200 |
| Geometric/shaped aluminum impact window (custom) | $2,200 - $4,800 |
| Arched/curved vinyl impact window (custom) | $1,800 - $3,800 |
| Arched/curved aluminum impact window (custom) | $2,800 - $5,500 |
| Oversized opening (custom fabrication required) | $3,500 - $8,500 |
How long does custom window fabrication take for Coral Springs?
Custom geometric and arched windows typically require 6-10 weeks from measured survey to delivery, with an additional 2-3 weeks for Coral Springs permitting and HOA architectural review. We build this timeline into your written scope with milestone dates.
Can you match my existing window shape exactly for HOA approval?
Yes. We template the existing opening and fabricate to those exact sightline and radius dimensions; the HOA receives the measured drawing, product rendering, and NOA documentation as part of our standard submittal package.
Brands We Service in Coral Springs
We install and service eight manufacturer lines in Coral Springs - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - specified by performance tier and price range, not by margin. We stock common hardware, rollers, and weatherstripping for PGT, Therma-Tru, and ViewLux systems locally, with most repair parts available within 48 hours. See our brands for full product line details.
Pricing for Windows & Doors in Coral Springs, FL
| Service | Typical range in Coral Springs |
|---|---|
| Single/double hung vinyl impact window | $650 - $1,400 |
| Single/double hung aluminum impact window | $1,100 - $2,200 |
| Horizontal roller vinyl impact window | $750 - $1,550 |
| Horizontal roller aluminum impact window | $1,200 - $2,400 |
| Fiberglass impact entry door | $1,200 - $2,800 |
| Aluminum impact entry door with sidelites | $2,200 - $4,500 |
| Low-E/argon upgrade (add to base impact window) | $80 - $180 per opening |
| ENERGY STAR vinyl impact window | $850 - $1,750 |
| Hurricane-rated single-car garage door | $2,200 - $4,500 |
| Hurricane-rated double-car garage door | $3,800 - $6,500 |
| Geometric/shaped vinyl impact window (custom) | $1,400 - $3,200 |
| Arched/curved vinyl impact window (custom) | $1,800 - $3,800 |
Prices in Coral Springs push higher when HOA architectural review requires custom color matching, when existing CBS openings need structural modification for HVHZ anchoring, or when custom geometric fabrication extends lead times. Your written quote from Sightline names the exact price before any work starts - Haven Clause 1 - and that document cannot change without a written change order you approve.
Neighborhoods We Serve in Coral Springs
We measure, specify, and install across Coral Springs’s full residential footprint, from the original 1960s sections through the 1980s-1990s master-planned phases. Scheduling and dispatch are coordinated from our Miami office, with crews serving Coral Springs locally and typically arriving within the agreed window.
- Ramblewood South
- Coral Springs Country Club
- Eagle Trace
- Kensington
- The Isles
Service Area - Cities Near Coral Springs
We install windows and doors throughout Broward County’s High-Velocity Hurricane Zone, with crews serving Margate, FL, Pompano Beach, FL, Plantation, FL, and Fort Lauderdale, FL from the same measured-survey and written-quote process. Every job carries the Haven Standard, the 365-Day Done Right Promise, and the documented photo record.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Coral Springs
Coral Springs’s active building department typically reviews window and door permits within 10-14 business days when the Miami-Dade NOA is current and complete, with an additional 2-4 weeks for HOA architectural review if required. We track both timelines in your written scope and schedule installation only after both approvals are in hand.
Yes. We pull the Coral Springs building permit with the Miami-Dade NOA product documentation, and we prepare the product data sheets, renderings, and color samples most HOAs require for architectural review. Both tracks are included in your written scope, not billed as extras.
Yes. Bring us any written estimate from another Coral Springs window or door contractor and we will review the product specifications, NOA validity, scope completeness, and pricing at no charge. Haven Clause 1 means we will also show you our written price for the same scope so you can compare documented evidence.
Call (754) 254-5294 to schedule your free measured survey and written estimate. Every opening we measure gets a sightline reading, a frame condition assessment, and a price you can hold in your hand before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Coral Springs Customers Say
"They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F.