New Window Installation Cost - Free Measure, Exact Written Quote

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

How Much Does New Window Installation Cost in Sunrise?

New window installation in Sunrise, FL typically runs $420 to $1,850 per window, all-in, depending on size, frame material, glass type, and whether the opening requires structural modifications. Most Sunrise homeowners replacing a standard single-hung or double-hung window in an existing opening land somewhere between $580 and $950 per unit when impact-rated glass is specified – which, in Broward County, it almost always should be. At Sightline Windows & Doors, the written price you receive before any work starts is the same document as the measured survey: one number, on paper, before a tool is lifted.

New Window Installation Cost Breakdown (2026)

New window installation in Sunrise costs more than the window itself. The price you pay covers product, labor, permits, and the debris removal that most contractors forget to mention until the invoice arrives. Every line below reflects what Sightline quotes in the Sunrise market in 2026 – not national averages pulled from a cost-aggregator.

What Does a Whole-Home Window Replacement Cost in Sunrise?

A typical Sunrise single-family home built in the 1980s or 1990s – say, in the Springtree or Welleby neighborhoods – usually has 12 to 18 openings. At mid-range impact pricing, that puts a full-home project between $9,500 and $18,000 before any structural work. Homes on the west side of Sunrise closer to the Sawgrass Expressway, which tend to be larger two-story builds, often carry 20 or more openings and can push toward $22,000 to $28,000 for a complete impact-rated replacement with high-performance glazing.

Those numbers assume a like-for-like replacement – same opening size, no header work, no stucco repair beyond a standard reseal. Any structural modification, siding repair, or specialty glass (Low-E coatings with a target Solar Heat Gain Coefficient below 0.25 for western exposures) adds cost, and that addition appears on the written quote before the crew schedules a start date. Haven Clause 1 – Have it in writing – is not optional on any Sightline project.

What Drives the Price Up or Down?

Frame material is the first split. Vinyl frames are the volume choice in Sunrise and carry the lowest unit cost. Aluminum frames, which CGI and CWS produce in high-performance impact profiles, cost roughly 15 to 25 percent more per unit but hold tolerances better in Florida’s thermal cycling and are the right spec for oceanfront or lake-adjacent properties where salt air degrades vinyl hardware faster. The homes along the Sunrise-Plantation line, near North Nob Hill Road, see a mix of both.

Glass specification is the second driver. A basic impact lite – laminated glass that meets the wind-load requirement – sits at the lower end of the ranges above. Step up to a Low-E2 or Low-E3 coating, and you add $60 to $140 per unit, depending on pane count. That cost is usually recovered in energy bills within three to five years in a Sunrise home that runs the AC nine months out of twelve – but the return-on-investment math belongs in a separate conversation, not on a price guide.

Opening count is the third variable. Single-window replacements carry a higher per-unit cost because setup, permit, and mobilization costs don’t scale. A homeowner replacing all 14 windows at once will pay less per unit than one replacing two windows now and planning to do the rest later.

What Affects New Window Installation Pricing in Sunrise

• Broward County impact requirements: Sunrise sits in the High-Velocity Hurricane Zone (HVHZ). Every window requires either impact-rated glazing or a rated shutter system – no exceptions under current code. Impact glass costs more upfront than standard double-pane, which is why Sunrise prices run higher than national averages published by home-improvement aggregators. Those national figures are not useful here.
• Home age and construction type: Concrete block construction, which dominates Sunrise neighborhoods built before 2000, often requires a different anchor-fin or fin-omit installation method than wood-frame homes. CBS homes in areas like Inverrary or Sunrise Golf Village sometimes have thicker rough openings that slow labor and affect flashing details. This shows up in the line items of the Sightline measured survey.
• Window size and configuration: A standard 3-foot-by-4-foot double-hung is the baseline. Anything wider than 60 inches, taller than 72 inches, or configured as a mulled unit – two or three windows joined in a single frame – adds product cost and increases installation time. The casement windows common in 2000s-era Sunrise tract homes are larger on average than those in 1970s-era builds, which affects both product and labor.
• Floor level and accessibility: Ground-floor installation in a single-story home is the simplest scenario. Second-story work or windows in stairwells requires scaffolding or ladder staging that adds time. In taller homes along the Sawgrass corridor, this can add $30 to $80 per window to labor.
• Manufacturer lead time and product availability: PGT, CGI, and CWS all manufacture within Florida, which keeps lead times shorter than out-of-state suppliers. Standard profiles typically run 3 to 6 weeks from order to delivery in the Sunrise market. Custom profiles or specialty glazing can extend to 8 to 12 weeks. The measured survey that becomes your written quote includes a realistic production timeline.
• Number of openings and project scope: As noted above, per-unit cost decreases as opening count increases. Permit fees also consolidate: one permit application covering multiple windows costs less per window than separate pulls. Sightline itemizes the permit cost on every quote so the comparison against competitors is exact.

Before

After

Sunrise Window Costs vs. Neighboring Markets

Homeowners in Sunrise sometimes get quotes from contractors working primarily in Fort Lauderdale, Plantation, or Coral Springs and notice different price points. The differences are usually small – $20 to $60 per unit in either direction – and tend to trace back to product specification rather than labor market differences. A contractor specifying a lower SHGC glass in a Plantation quote might be pricing a more efficient product than a competitor’s baseline Sunrise quote. The written quote should name the product line, the glass specification, and the U-factor and SHGC values. If it doesn’t, ask.

Sightline’s New Window Installation in Sunrise page covers the full scope of what an installation engagement looks like – from the initial measured survey through the documented photo record left at job completion. The price guide you’re reading right now is the companion to that page: the numbers without the process narrative.

How to Save on New Window Installation in Sunrise

Replace All Windows in One Project if You Can

The per-unit cost drops when you replace every window in a single engagement. Setup, permitting, and product ordering all carry fixed costs that are spread across more units. A homeowner replacing 16 windows at once will pay less per window than one replacing 4 now and scheduling the rest across three future visits. If budget is the constraint, ask Sightline about phased quotes that lock in today’s product pricing while spreading installation across two permits.

Understand What the Permit Covers

In Sunrise, pulling the permit is not optional and not a cost you can skip by hiring a cash-only contractor. An unpermitted window replacement in Broward County creates a title problem when you sell. Sightline pulls every permit and itemizes the cost on the written quote. If a competitor’s quote is lower but doesn’t mention permitting, ask specifically whether it’s included. The answer will clarify why the number looks different.

Match the Product to the Opening, Not to an Upsell

Eight manufacturer lines means Sightline doesn’t have a financial reason to push one brand over another. A standard PGT WinGuard single-hung is the right product for most Sunrise residential openings. Upgrading to a CGI Series 350 aluminum casement is warranted in specific situations – lake-facing exposures, wide-span openings, or homes where the aesthetic requires an aluminum sightline. The measured survey documents which product is specified and why. You’re not being sold a product tier; you’re being handed the logic in writing.

Use the Free Second Opinion on Any Written Estimate

If you have a written quote from another Sunrise contractor, Sightline will review it at no charge. This isn’t a sales tactic; it’s a way to verify that the spec, the product, and the permit cost are all present and accurate. Homeowners in the Sunrise Lakes and Springtree areas have used this to catch quotes missing haul-away fees or specifying non-HVHZ glass. Call (754) 254-5294 to set that up – it’s a 15-minute review, not a pitch session.

Ask About Florida Energy Efficiency Programs

Florida’s Property Assessed Clean Energy (PACE) financing and certain utility rebate programs through Florida Power & Light apply to high-efficiency window replacements in Broward County. These programs change eligibility terms frequently, so Sightline documents the specific glass specification on your written quote in a format that satisfies most rebate applications. Ask about current FPL rebate windows when you call for your estimate.

Avoid the “Measure Now, Quote Later” Contractor

Some window contractors measure in one visit and send a quote days later, sometimes after product pricing has shifted. The Sightline model – where the measured survey and the written price are the same document – eliminates that gap. Haven Clause 1 means the number you see on the day of the survey is the number on the invoice. There are no revision emails, no “materials went up” addenda, and no change orders for items that were visible during the initial visit.

FAQs – New Window Installation Cost in Sunrise

How much does it cost to install one window in Sunrise, FL?

A single impact-rated window installation in Sunrise typically costs $580 to $950, including the window, labor, and permit. Single-window projects run toward the higher end of that per-unit range because permit fees and mobilization costs don’t scale down proportionally. If you’re replacing a damaged or failed unit in an existing impact opening, call (754) 254-5294 for an exact written quote – Sightline’s measured survey and the final price are the same document, so there’s no estimate drift.

Do I need impact windows in Sunrise, or can I use regular glass?

In Sunrise, the Broward County building code requires every window to meet the High-Velocity Hurricane Zone standard. That means either impact-rated laminated glass or a combination of standard glass with an approved rated shutter system. Most homeowners choose all-impact because it eliminates the shutter deployment step before every storm. Non-impact windows can be permitted in Sunrise only when a compliant shutter system is documented in the permit application. Sightline specifies the correct product for each opening on the written survey so the permit clears without revision requests.

How long does window installation take in Sunrise?

Installation of a standard impact window in an existing opening takes 60 to 90 minutes per window for a two-person crew. A full-home replacement of 12 to 16 windows typically runs two full days. Production lead time – from the signed quote to the windows arriving from the manufacturer – is typically 3 to 6 weeks for standard PGT, CGI, or ES Windows profiles. Custom shapes from ViewLux or mulled configurations can extend to 10 to 12 weeks. Your written survey includes a production timeline so you can plan around it.

Is it cheaper to repair or replace a window in Sunrise?

If the glass unit has failed – visible condensation between panes, a cracked impact lite, or a broken seal – replacement is almost always the better financial decision in Sunrise. Repairing an impact lite in an existing frame costs $180 to $380 per opening, and that cost is not recovered if the frame itself is aging, the weatherstripping is compromised, or the frame is an older profile that no longer meets current HVHZ standards. A failed window in a Sunrise home built before 2001 is often a compliance issue, not just a comfort one. The measured survey will tell you which situation you’re in, in writing, before you commit to anything.

What is the difference between window replacement and new window installation in Sunrise?

Window replacement means pulling out an existing window and installing a new one in the same rough opening with no structural changes. New window installation means creating an opening where none existed, or significantly altering the existing rough opening – widening, raising, or reshaping it. In Sunrise, new installations require a separate structural permit and often a header inspection. The cost difference is significant: new installation adds $300 to $900 per opening in structural and framing work beyond the window unit itself. Sightline’s measured survey documents the opening type, the rough opening dimensions, and any structural modification scope before a price is named.

Which window brands does Sightline install in Sunrise?

Sightline specifies from eight manufacturer lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. In the Sunrise residential market, PGT WinGuard and ES Windows cover most standard single-hung and casement applications. CGI Series aluminum profiles are specified for aluminum-frame requirements, wider spans, or lake-facing exposures where salt air is a factor. ViewLux handles custom and geometric profiles. The written survey names the product line, the series, the glass specification, and the relevant performance ratings – U-factor, SHGC, and impact certification – for each opening.

Key Takeaways

• New window installation in Sunrise runs $420 to $1,850 per window, with most standard impact replacements landing between $580 and $950.
• Broward County’s HVHZ code means impact-rated glazing is effectively required on every opening – budget accordingly and be cautious of quotes that don’t specify the glass type.
• A whole-home replacement in a typical Sunrise single-family home (12 to 18 windows) runs $9,500 to $18,000 at mid-range impact pricing before any structural modifications.
• Per-unit cost decreases as opening count increases; replacing all windows in one project is the most efficient use of permit fees and labor mobilization.
• The permit is mandatory and should appear as a line item on any legitimate quote. If it’s missing, ask.
• Sightline’s written quote and measured survey are the same document – the number you see during the survey is the number on the invoice. Haven Clause 1, on every job.
• The 365-Day Done Right Promise applies to every window Sightline installs in Sunrise: if it’s not right, it gets made right, in writing, under the Haven Standard.

Get a Written Price Before Any Work Starts

If you’re planning a window replacement in Sunrise and want a number in writing before anyone talks you into a product, call Sightline Windows & Doors at (754) 254-5294. Sonia Raman leads the team that built Sightline on the principle that the measured survey and the written price travel together – one document, no revisions, no surprises. We’ve completed more than 18,000 window and door installations across South Florida since 2012, every one with a written price before work started and a documented photo record when it finished.

If you have a written quote from another Sunrise contractor, bring it to us. We’ll review it at no charge – not to beat the price, but to make sure the product spec, the permit cost, and the scope match what you think you’re buying. Call (754) 254-5294, or visit our home page to learn more about how Sightline operates.

Pricing reflects the Sunrise, FL market as of 2026 and is based on Sightline’s measured survey data for the Broward County High-Velocity Hurricane Zone. Individual project costs vary by opening count, structural conditions, and product specification. Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Sunrise since 2012. Sightline Windows & Doors Sunrise offers free estimates – call (754) 254-5294.