PGT Window Replacement Nationwide | Sightline Windows & Doors Sunrise

PGT Window Replacement: The Sunrise Owner’s Guide

PGT window replacement in Sunrise typically runs $340-$780 per opening for standard vinyl impact-rated units, with most jobs scheduled within 48 hours of the measured survey. We stock PGT-compatible hardware, glazing beads, and sash assemblies on our trucks, and we carry full unit lines from the PGT WinGuard and EnergyVue series for same-week install once the opening is surveyed. Most Sunrise homeowners discover a failing PGT window when the sash won’t stay up, the lock bar drags, or they feel air movement around a frame that used to seal tight against afternoon thunderstorms rolling off the Everglades.

Call (754) 254-5294

Which PGT Models This Applies To

PGT has manufactured windows in Florida since 1980, and the product lines common in Sunrise subdivisions built between 2005 and 2020 fall into three main series. The WinGuard aluminum and vinyl impact lines carry a laminated glass package rated for HVHZ (High Velocity Hurricane Zone) loads; the EnergyVue vinyl line targets energy code compliance with lower U-factors; and the older PGT 7700 Series aluminum single-hung units still appear in Inverrary and Welleby homes from the early 2000s.

To identify your exact model, check the etched mark in the glass corner or the label on the frame head. The series code (WGA for WinGuard Aluminum, WGV for WinGuard Vinyl, EV for EnergyVue) tells us which sash balance, glazing bead profile, and screen track to order. The size stamp matters too: PGT builds to 1/8-inch increments, and a sash ordered 35-7/8″ wide will not fit a 36-inch rough opening without shimming that compromises the impact rating.

We are an independent service provider, not affiliated with PGT. For most replacements we specify PGT OEM parts where the warranty or code compliance requires it; for hardware and weatherstrip beyond the original warranty period, we match spec-grade aftermarket equivalents that meet the same AAMA 2605 finish and ASTM E1996 impact standards. The decision depends on what the opening needs, not what is in stock.

Signs Your PGT Window Replacement Is Failing

• Sash drops or won’t stay open. The coil balance or block-and-tackle assembly has lost tension. In Sunrise, the constant salt-air exposure accelerates corrosion in the balance shoe, and we’ve found units in Welleby with balances that failed in under eight years because the original installer never lubed the track.
• Visible moisture between glass panes. The insulated glass unit (IGU) seal has failed. PGT’s warranty covers this for 10 years from manufacture on most lines, but the installation date and the glass etch date rarely match; we document both on the measured survey so there’s no dispute.
• Lock bar drags or won’t engage. The keep or cam has shifted, or the frame has settled. In Broward’s sandy soils, minor settling is normal, but a lock that forces closed is stressing the sash rails and will crack the corner keys.
• Air infiltration at the sill or jamb. The pile weatherstrip has compressed or the glazing bead has pulled away. We check this with a smoke pencil during survey; a 1/16-inch gap at the sill translates to measurable load on your AC in July.
• Frame corrosion or vinyl chalking. Aluminum frames in east-facing Sunrise units show pitting first; vinyl frames oxidize to a powdery film. Neither is cosmetic only: corrosion undermines the structural clip that holds the sash in a wind load.

Before

After

Replacement Cost & What’s Included

The range depends on three factors we document on every measured survey: the series and size (impact-rated laminated glass costs more than monolithic), the floor level (second-story carries ladder and scaffold time), and whether the existing frame is square within 1/4 inch. If the frame is out of plumb, we note the correction in the written scope before any work starts, not as a change order after. Every PGT replacement we complete in Sunrise carries our 365-Day Done Right Promise under the Haven Standard, and the photo record shows the frame readings, the installed unit label, and the sealed perimeter.

DIY or Call Us?

An owner can safely check the model label, measure the visible glass dimensions, and photograph the failure. What we do not recommend: removing a sash from a PGT impact-rated unit without understanding the structural clip sequence, or attempting to reglaze a laminated glass lite. The clips are spring-loaded and the glass is heavy; we’ve responded to calls in Sawgrass Estates where a dropped sash cracked the tile below and lacerated the homeowner’s forearm.

For balance replacement, IGU swaps, or full unit pulls, the tolerances are tight and the code compliance is documented. We pull the permit when required by Sunrise building services, we bed the frame to the manufacturer’s specified sealant depth, and we leave you the photo record. If you have a competitor’s quote, we will review it at no charge. Call (754) 254-5294 to schedule your free estimate.

FAQs