Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Fort Lauderdale, FL
Window installation in Fort Lauderdale runs $650-$1,400 per opening for standard vinyl or aluminum units, and $1,200-$2,800 for impact-rated products that carry the Miami-Dade NOA required in this High-Velocity Hurricane Zone. Most homes in Las Olas Isles, Coral Ridge, and Rio Vista still carry original single-pane jalousie or thin aluminum-frame windows from the 1950s-1970s CBS construction era, making replacement both a code-compliance and energy-efficiency project. Call (754) 254-5294 to schedule your free measured survey - the written quote we produce is the same document that governs the installation.
Why Fort Lauderdale Homes Are Different
Fort Lauderdale sits inside Florida’s High-Velocity Hurricane Zone alongside Miami-Dade, which means every replacement window and door must carry a Miami-Dade Product Control Notice of Acceptance - a standard that does not apply to Palm Beach County or most of the state. Broward County inspectors verify the NOA number on permit drawings against the actual product installed; contractors who substitute standard Florida Building Code-approved products without the HVHZ NOA face failed inspections and forced tear-outs.
The city’s 300-plus miles of navigable canals create another condition almost nowhere else in Florida: a disproportionate share of homes sit on direct saltwater. In Coral Ridge and Las Olas Isles, we’ve measured frame corrosion on non-marine-grade hardware within three to five years of installation. The salt-laden air off the Atlantic and the inland canal network, combined with intense subtropical UV, degrades seals, coatings, and hardware faster than in any inland Florida market. Marine-grade stainless hardware and impact-laminated glazing are effectively non-negotiable on waterfront installations.
Our Main Fort Lauderdale Services
Fort Lauderdale homeowners contact us most often for full window replacement and impact-rated protection. These three services have dedicated Fort Lauderdale pages with deeper product and pricing detail:
Window Replacement in Fort Lauderdale
Most Fort Lauderdale window replacement projects involve removing original single-pane jalousie or thin aluminum-frame units from 1950s-1970s CBS construction and installing impact-rated or energy-efficient replacements that meet HVHZ standards. The measured survey documents every opening’s rough dimensions, frame condition, and exposure to salt air, which determines whether we specify marine-grade hardware. Window Replacement in Fort Lauderdale covers the full product line and permit process.
Impact Windows & Doors in Fort Lauderdale
Impact windows and doors in Fort Lauderdale must carry a current Miami-Dade NOA, not just Florida Building Code approval, to pass Broward County inspection. We specify PGT, CGI, and ES Windows products by NOA number and exposure rating, matching the glazing to the home’s distance from saltwater and its wind-borne debris zone. Impact Windows & Doors in Fort Lauderdale details the NOA verification process.
Sliding & Patio Doors in Fort Lauderdale
Sliding and patio door replacement in Fort Lauderdale often involves oversized openings on canal-front and Intracoastal properties, where the combination of HVHZ wind loads and salt corrosion destroys standard rollers and tracks. We measure sightline requirements, sill height above flood plain, and exposure to determine hardware specification. Sliding & Patio Doors in Fort Lauderdale covers multi-panel and impact-rated options.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Fort Lauderdale
Window installation in Fort Lauderdale is governed by two conditions that don’t overlap elsewhere in Florida: the HVHZ NOA requirement for every product, and the saltwater corrosion that attacks standard aluminum frames and hardware within seasons. Most of the homes we measure in Rio Vista, Coral Ridge, and Las Olas Isles were built between 1950 and 1980 with single-pane jalousie or thin aluminum-frame windows that are neither impact-rated nor energy-efficient. Window Installation covers our full methodology, but Fort Lauderdale jobs require additional steps - marine-grade hardware specification, NOA verification against permit drawings, and documented photo records that include frame-condition readings before and after.
Single & Double Hung Windows
Signs you need it
Original single-pane glass, corroded balance mechanisms, or frames that rattle in a 30 mph breeze off the Intracoastal.
What it costs in Fort Lauderdale
Standard aluminum single or double hung windows run $650-$1,100 per opening; impact-rated units with Miami-Dade NOA and marine-grade hardware range from $1,200-$2,200.
How we do it
We remove the sash, inspect the rough opening for block deterioration or salt intrusion, install the new unit with backer rod and sealant rated for UV and salt exposure, then document the sightline measurement and frame reading in the photo record you keep.
3-Panel Sliding (3-Lite Roller) Windows
Signs you need it
Sticking rollers, daylight visible through the meeting stile, or original 1970s aluminum frames with failed thermal breaks on a canal-facing elevation.
What it costs in Fort Lauderdale
Three-lite sliding windows start at $1,400-$2,200 for standard construction; impact-rated 3-panel units with HVHZ NOA and stainless roller hardware run $2,400-$3,800.
How we do it
We measure the rough opening to 1/16 inch, verify the sill slope drains away from the track, install marine-grade stainless rollers and a reinforced interlock, then pressure-test the operable panels before the documented photo record is stamped complete.
What Window Installation Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Standard single/double hung (aluminum frame) | $650 - $1,100 |
| Impact-rated single/double hung with NOA | $1,200 - $2,200 |
| 3-panel sliding window, impact-rated | $2,400 - $3,800 |
Do you pull permits for window replacement in Fort Lauderdale?
Yes - Broward County requires a building permit for every window replacement, and we include permit pulling in our written scope. The permit application lists the exact Miami-Dade NOA number for each product, which the inspector verifies on site. Call (754) 254-5294 and we’ll review the permit timeline with your estimate.
How long does window installation take in Fort Lauderdale?
Most single-opening replacements finish in one day; full-home projects of 15-25 openings typically run 3-5 days depending on stucco repair and trim coordination. We schedule Broward County inspection before final payment. Call (754) 254-5294 for a written timeline with your estimate.
Door Installation in Fort Lauderdale
Door installation in Fort Lauderdale faces the same HVHZ NOA requirement as windows, with the added complexity of entry door exposure to direct salt spray on canal-front homes. Original 1960s and 1970s hollow-core or thin steel doors in Coral Ridge and Rio Vista offer no impact resistance and minimal insulation; replacement with a Therma-Tru or CGI entry system rated for HVHZ and fitted with marine-grade hinges and multipoint hardware is standard on waterfront properties. Door Installation details our measured survey process, but Fort Lauderdale jobs require NOA verification and hardware specification by exposure zone.
Hurricane-Proof Front & Entry Doors
Signs you need it
Door face delaminating from salt corrosion, daylight visible around the jamb, or a failed Miami-Dade NOA on the existing unit.
What it costs in Fort Lauderdale
Impact-rated fiberglass entry doors with HVHZ NOA and multipoint hardware run $2,200-$4,500 installed; steel-reinforced systems with custom sidelites range from $3,800-$6,200.
How we do it
We measure the rough opening and jamb depth against the CBS wall thickness, specify the door slab and frame by NOA number, install with pressure-treated buck and stainless fasteners, then document the sightline and hardware torque in the photo record.
French & Double Doors
Signs you need it
Operating panels that no longer align at the meeting stile, corroged hinges, or original doors without impact-rated glazing in a wind-borne debris zone.
What it costs in Fort Lauderdale
Impact-rated French door pairs with laminated glass and HVHZ NOA start at $3,200-$5,400; oversized or multi-panel systems with custom hardware run $5,800-$9,500.
How we do it
We verify the header can carry the dead load of impact-rated glass, install adjustable stainless hinges and a multipoint lock system, align the meeting stile to 1/8 inch, then pressure-test and photograph the completed assembly.
What Door Installation Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Impact-rated fiberglass entry door | $2,200 - $4,500 |
| Steel-reinforced entry with sidelites | $3,800 - $6,200 |
| Impact-rated French door pair | $3,200 - $5,400 |
Do entry doors need a Miami-Dade NOA in Fort Lauderdale?
Yes - every exterior door in Broward County’s HVHZ must carry a valid Miami-Dade Product Control Notice of Acceptance, not just Florida Building Code approval. We verify the NOA number on every door we specify and list it on the permit drawing. Call (754) 254-5294 to review the documentation.
Can you match my stucco finish after door replacement?
Yes - door replacement in CBS construction requires stucco repair at the perimeter, and our written scope includes finish matching to the existing texture and color. We photograph the original condition and the completed repair in the documented photo record. Call (754) 254-5294 for a written estimate.
Energy-Efficient Windows in Fort Lauderdale
Energy-efficient windows in Fort Lauderdale address a specific problem: original single-pane jalousie and thin aluminum-frame units from the 1950s-1980s CBS era conduct heat so aggressively that cooling costs run 30-50 percent above modern construction. The subtropical UV and salt air compound the issue by degrading seals and frame coatings, so energy performance must be paired with marine-grade durability. Energy-Efficient Windows covers our full product methodology, but Fort Lauderdale specifications prioritize low-E coatings with high salt-resistance and U-factors below 0.30 for the cooling-dominated climate.
Low-E & Argon Gas Glass
Signs you need it
Rooms that overheat by mid-morning despite closed blinds, or utility bills that spike in July and August when the sun angle is highest.
What it costs in Fort Lauderdale
Low-E coated dual-pane units with argon fill run $750-$1,350 per opening; impact-rated low-E systems with HVHZ NOA range from $1,400-$2,600.
How we do it
We measure each opening’s solar heat gain coefficient requirement by orientation, specify the low-E coating and argon fill by performance tier, install with warm-edge spacers rated for salt exposure, then document the U-factor and SHGC readings in the photo record.
Insulated Laminated Glass
Signs you need it
Street noise or boat traffic penetrating single-pane glass, or a requirement for both impact protection and thermal performance in one unit.
What it costs in Fort Lauderdale
Insulated laminated glass with low-E and argon, impact-rated for HVHZ, runs $1,600-$2,900 per opening; non-impact insulated laminated units for interior elevations start at $950-$1,700.
How we do it
We specify the laminated interlayer thickness by exposure and acoustic requirement, verify the insulated unit’s edge seal against salt vapor, install with marine-grade hardware, then test and document the assembly’s performance data.
What Energy-Efficient Windows Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Low-E/argon dual-pane, standard frame | $750 - $1,350 |
| Impact-rated low-E with HVHZ NOA | $1,400 - $2,600 |
| Insulated laminated glass, impact-rated | $1,600 - $2,900 |
Will energy-efficient windows lower my FPL bill in Fort Lauderdale?
Yes - replacing single-pane aluminum-frame windows with low-E, argon-filled units typically reduces cooling load by 15-25 percent in Fort Lauderdale’s climate, with greater savings on west and south elevations. We calculate estimated savings by orientation during the measured survey. Call (754) 254-5294 for a written estimate with performance projections.
Do energy-efficient windows still need impact rating in Fort Lauderdale?
They do if they’re on an exterior wall - Broward County requires HVHZ impact protection for all exterior glazing, and energy performance is layered into that requirement. We specify products that carry both the Miami-Dade NOA and the ENERGY STAR certification for South Florida climate zone. Call (754) 254-5294 to review qualifying products.
Impact Garage Doors in Fort Lauderdale
Impact garage doors in Fort Lauderdale are frequently overlooked in HVHZ compliance - homeowners replace windows and entry doors but leave a 16-foot wide, non-rated garage door facing the Intracoastal or Atlantic exposure. Original flat-panel or thin steel garage doors from the 1960s-1980s offer no wind-load resistance and often fail first in a hurricane, pressurizing the structure. Impact Garage Doors covers our full specification process, but Fort Lauderdale installations require wind-load calculations by exposure category and marine-grade track hardware for salt-air properties.
Hurricane-Rated Garage Doors
Signs you need it
Original garage door without a wind-load sticker, visible corrosion on track or rollers, or a Broward County code compliance notice.
What it costs in Fort Lauderdale
Hurricane-rated garage doors with HVHZ NOA and reinforced track systems run $2,800-$5,200 for a standard two-car opening; custom wind-load designs for oversized or high-exposure properties range from $4,500-$8,500.
How we do it
We calculate the required wind-load rating by exposure category and door size, specify the door and track system by Miami-Dade NOA, install with reinforced jamb brackets and marine-grade hardware, then document the spring tension and wind-load label in the photo record.
Wind-Load Code Compliance
Signs you need it
Permit application for window replacement that triggers a garage door inspection, or a non-compliant door flagged during home sale or insurance renewal.
What it costs in Fort Lauderdale
Wind-load retrofit of an existing garage door with reinforcement kit and upgraded track hardware runs $1,400-$2,800; full replacement with HVHZ-rated door and automatic opener starts at $3,200-$5,800.
How we do it
We inspect the existing door structure for reinforcement feasibility, calculate the required wind-load pressure, install either a retrofit kit or full replacement with documented NOA verification, then schedule Broward County inspection before final payment.
What Impact Garage Doors Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Hurricane-rated garage door, standard 2-car | $2,800 - $5,200 |
| Custom wind-load, oversized/high-exposure | $4,500 - $8,500 |
| Wind-load retrofit with reinforcement kit | $1,400 - $2,800 |
Does my garage door need a Miami-Dade NOA in Fort Lauderdale?
Yes - garage doors are exterior openings under Broward County’s HVHZ requirements, and inspectors verify the wind-load sticker and NOA number against the permit. We include this verification in every written scope. Call (754) 254-5294 to check your existing door’s compliance.
Can I keep my garage door opener with a new impact-rated door?
Sometimes - if the opener’s horsepower and rail system match the new door’s weight and balance, we reinstall it; if not, we specify a replacement in the written quote before work starts. We test every opener for force settings and safety reversal after installation. Call (754) 254-5294 for a written assessment.
Custom & Geometric Windows in Fort Lauderdale
Custom and geometric windows in Fort Lauderdale appear most often in the estate-sized canal-front homes of Las Olas Isles and Coral Ridge, where arched transoms, circular accent windows, and oversized glazed walls were designed for aesthetics without regard for HVHZ impact standards. Replacing these openings requires custom fabrication with Miami-Dade NOA, not site-built adaptation of standard units. Custom & Geometric Windows details our measurement and fabrication coordination, but Fort Lauderdale projects require marine-grade hardware specification and often involve working with original architectural drawings from the 1960s-1980s.
Arched & Curved Windows
Signs you need it
Original arched windows with single-pane glass or failed sealant, or a renovation requiring new curved openings that must carry HVHZ NOA.
What it costs in Fort Lauderdale
Custom arched impact-rated windows with Miami-Dade NOA run $2,400-$4,800 per opening; non-impact custom curved units for interior or protected elevations start at $1,600-$3,200.
How we do it
We template the exact radius on site, coordinate fabrication with the manufacturer’s engineering team for NOA compliance, install with custom jamb extensions matched to CBS wall thickness, then document the sightline and sealant continuity in the photo record.
Oversized Openings
Signs you need it
Glazed walls or picture windows exceeding 72 inches in either dimension, or original sliding glass door systems being replaced with fixed or operable window walls.
What it costs in Fort Lauderdale
Oversized impact-rated window walls with HVHZ NOA and structural silicone glazing run $4,500-$9,500 per opening depending on span and wind-load requirement; custom geometric shapes within the wall add 20-40 percent.
How we do it
We engineer the header reinforcement with a structural engineer’s letter, specify the glazing system by design pressure and NOA, install with marine-grade anchors and capillary breaks, then pressure-test and photograph the completed assembly.
What Custom & Geometric Windows Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Custom arched impact-rated window | $2,400 - $4,800 |
| Custom curved, non-impact | $1,600 - $3,200 |
| Oversized impact-rated window wall | $4,500 - $9,500 |
Can you replicate my original arched windows with impact-rated glass?
Yes - we template the original radius and sightline, then coordinate with our manufacturer to fabricate a unit that carries the Miami-Dade NOA while matching the original profile. The written quote includes the template fee and fabrication timeline before work starts. Call (754) 254-5294 to schedule templating.
Do oversized windows require engineering in Fort Lauderdale?
Yes - openings exceeding certain spans or located on high-exposure elevations require a structural engineer’s letter for the permit application, which we coordinate as part of our written scope. The engineer verifies header capacity and anchor design for HVHZ wind loads. Call (754) 254-5294 for details on your specific opening.
Brands We Service in Fort Lauderdale
We install and service PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux products in Fort Lauderdale, stocking marine-grade hardware and common replacement parts locally for faster turnaround. Our brands are specified by performance tier and exposure requirement, not by margin.
Pricing for Windows & Doors in Fort Lauderdale, FL
| Service | Typical range in Fort Lauderdale |
|---|---|
| Standard single/double hung window | $650 - $1,100 |
| Impact-rated single/double hung window | $1,200 - $2,200 |
| 3-panel sliding window, impact-rated | $2,400 - $3,800 |
| Low-E/argon dual-pane window | $750 - $1,350 |
| Impact-rated low-E window | $1,400 - $2,600 |
| Insulated laminated glass, impact-rated | $1,600 - $2,900 |
| Impact-rated fiberglass entry door | $2,200 - $4,500 |
| Steel-reinforced entry with sidelites | $3,800 - $6,200 |
| Impact-rated French door pair | $3,200 - $5,400 |
| Hurricane-rated garage door, 2-car | $2,800 - $5,200 |
| Wind-load garage door retrofit | $1,400 - $2,800 |
| Custom arched impact-rated window | $2,400 - $4,800 |
Prices increase in Fort Lauderdale when marine-grade hardware is required for saltwater exposure, when structural engineering is needed for oversized openings, or when stucco repair and trim matching are included. The written quote you receive before any work starts is the same document that governs the final invoice - Haven Clause 1, no surprises.
Neighborhoods We Serve in Fort Lauderdale
We measure, specify, and install windows and doors across Fort Lauderdale’s full residential core, from the canal-front estates of Las Olas Isles to the mid-century homes of Coral Ridge and Rio Vista. Scheduling and dispatch are coordinated from our Miami office; crews serve Fort Lauderdale locally with same-day measured surveys typically available within 48 hours of contact.
- Las Olas Isles
- Coral Ridge
- Rio Vista
- Victoria Park
- Tarpon River
Service Area - Cities Near Fort Lauderdale
Our crews work throughout Broward County and adjacent municipalities, with measured surveys and installation available in Plantation, FL, Pompano Beach, FL, Hollywood, FL, and Margate, FL. Every job carries the same Haven Standard documentation, written pricing, and 365-Day Done Right Promise regardless of location.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Fort Lauderdale
We typically schedule measured surveys within 48 hours of contact, with live phone coverage available 24/7 to coordinate timing. The survey produces the written quote you keep, and that document cannot differ from the final invoice. Call (754) 254-5294 to schedule.
Many do - Las Olas Isles, Coral Ridge, and Rio Vista associations often have architectural review boards that require product samples, color approvals, or sightline drawings before work begins. We provide the documentation package from our measured survey to support your application, and we do not start installation until HOA approval and the building permit are both in hand.
It doesn’t - we verify the Miami-Dade NOA number on every product against the permit drawing before ordering, and we schedule the inspector only after our own completion checklist is documented. In the rare event of an issue, the 365-Day Done Right Promise covers correction at no additional cost. Call (754) 254-5294 to review our inspection-pass record.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Lauderdale Customers Say
"The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C.