Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterECO Window Systems Windows & Doors in Sunrise, FL | Sightline Windows & Doors Sunrise
Our Window Replacement in Sunrise runs $180-$420 for most hardware and seal repairs, while full-frame impact replacements on 1970s-era homes typically fall between $890-$1,850 per opening depending on size and permit complexity. We’re an independent contractor, not authorized by ECO Window Systems, with twelve years of documented work on their vinyl impact lines across Broward County’s high-velocity hurricane zone. Call (754) 254-5294 to schedule your free measured survey - the written quote you receive is the same document we install from, per Haven Clause 1.
Why Sunrise Residents Choose Us for ECO Window Systems Service
We’ve worked on ECO Window Systems products in Sunrise long enough to know which extrusion generations match which hardware kits, and which glazing seals fail first in this specific climate. Sonia Raman, our owner, started with glazing tools at Miami Dade College’s Kendall Campus vocational program and has spent well over a decade measuring and setting windows across this city - her crew still uses the Inverrary neighborhood as the reference point when she trains new hires on sightline alignment. That matters because ECO’s vinyl impact frames perform differently when they’re bedded into a 1978 CBS rough opening that still carries aluminum oxidation from the original single-pane unit.
We carry OEM ECO hardware and impact-rated glazing components in our local inventory, and when OEM is back-ordered or discontinued, we source quality aftermarket parts that meet the same Miami-Dade and Broward impact standards. Every technician is background-checked, uniformed, and identified by license number before arrival - Haven Clause 3, Verified Crews. The photo record we leave behind documents every stage, and the 365-Day Done Right Promise is stamped on the job, not offered as a courtesy.
Our ECO Window Systems sales & service covers the full product range, but our Sunrise service area is where we’ve built the deepest field knowledge on how these units age.
Common ECO Window Systems Windows & Doors Problems We Solve in Sunrise
- Glazing seal fogging on vinyl impact single-hungs. ECO’s vinyl impact sashes in Sunrise’s UV and humidity often show seal failure along the bottom edge first, where water pools after afternoon storms. The glass fogs between panes and the impact laminate starts to delaminate. We replace with OEM or equivalent impact-rated glazing, and we check the weep system - clogged drains are why the water sat there.
- Frame racking from oxidized rough openings. On 40-50 year old Sunrise homes with ECO vinyl impact retrofits from the early 2000s, the original aluminum frame oxidation has eaten into the rough opening itself. The ECO replacement frame racks, the sash binds, and the owner thinks the window failed. The window is fine. The opening is not. We grind, re-flash, and shim to square before the new unit goes in.
- Corroded rollers and tracks on horizontal rollers and 3-panel sliders. Salt-laden air and constant humidity keep ECO aluminum tracks wet in Sunrise. The rollers pit, the track corrodes, and the door jumps or drags. We replace with stainless or polymer rollers and clean the weep system - otherwise the new parts fail the same way.
- Threshold seal failure on entry and French doors. ECO door threshold seals crack and separate in Sunrise heat, letting wind-driven rain into the jamb. The substrate swells. The door sticks long before the seal looks obviously failed. We catch this during measured survey because we check the jamb with a moisture meter, not just a visual.
- Hardware binding from frame twist. When the original aluminum frame oxidizes unevenly in a CBS wall, the replacement frame torques. ECO’s cam locks and tilt latches strain against the twist. We fix the opening first, then replace the hardware - not the other way around.
Before
AfterECO Window Systems Service in Sunrise: What Local Conditions Mean for Your Equipment
Sunrise was almost entirely built out between the late 1960s and early 1980s, which means the housing stock - including massive 55-plus communities like Sunrise Lakes - still carries original aluminum single-pane windows installed decades before Florida’s post-Hurricane Andrew impact-resistance mandates. Broward County enforces 140+ mph design wind-load compliance on every permitted replacement, so virtually every Impact Windows & Doors - Sunrise job is simultaneously a retrofit and a full impact-upgrade project. That combination is less common in newer cities on either side of it, and it changes how ECO Window Systems products get specified.
In Sunrise Lakes specifically, every ECO Window Systems window or door replacement must clear both the condo association’s architectural review board and Broward County’s impact-glazing permit inspection. Contractors who don’t pre-submit the association approval paperwork before pulling the permit routinely face multi-week delays. Because Sunrise Lakes is one of Florida’s largest 55-plus developments, that two-track approval is a daily reality here in a way it simply is not in newer Broward cities. We submit the association packet first, then pull the permit. The field vignette from Phase 4 is typical: we replaced failing ECO vinyl impact single-hungs in a 1979 CBS unit where original aluminum oxidation had thrown the rough openings out of square. Our crew ground and re-flashed, shimmed to Broward’s 140+ mph design load, and installed new OEM impact sashes. The owner got the association approval letter and county inspection sign-off in the same week. The difference was sequence. Measure it right once, and the install tells you nothing went wrong.
ECO Window Systems Models & Products We Service in Sunrise
We work on the full ECO Window Systems vinyl impact line: Single-Hung (SH) series, Horizontal Roller (HR) series, 3-Panel Sliding Glass Door, and Double-Hung (DH) series. Our local inventory stocks OEM ECO hardware kits, glazing seals, and impact-rated replacement glass for the SH and HR lines - the most common in Sunrise retrofits. For the 3-Panel Sliding Glass Door, we keep stainless and polymer roller sets on hand because track corrosion is the dominant failure mode we see here.
When ECO has discontinued a part or OEM is back-ordered, we source aftermarket components that carry the same Miami-Dade NOA and Broward County approval documentation. We don’t install non-impact-rated substitutes in this wind zone - the permit inspector won’t pass them, and we won’t put our name on them. If the ECO vinyl frame is twisted, the sill is rotted, or the opening itself is out of square, we tell you straight: a full-frame replacement is the honest fix, not an insert that binds again in two years.
ECO Window Systems Service Pricing in Sunrise
| Service Type | Typical Range in Sunrise |
|---|---|
| Hardware repair (locks, rollers, tilt latches) | $180-$290 |
| Glazing seal replacement / defogging | $220-$420 |
| Track cleaning, roller replacement, weep system service | $240-$380 |
| Threshold seal and jamb repair | $280-$450 |
| Full-frame ECO impact replacement (per opening, including permit) | $890-$1,850 |
| Sunrise Lakes two-track permit coordination (add-on) | $0 - included in full-frame quote |
What drives cost: the condition of the original rough opening, whether Broward County requires structural re-flashing, and whether the job is in a managed community with architectural review. Every estimate begins with a measured survey you keep. The written scope and price cannot differ from that document - Haven Clause 1, Have it in writing. Call (754) 254-5294 for your free measured survey and written quote.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - ECO Window Systems Windows & Doors in Sunrise
Yes. Both are mandatory. The association’s architectural review board must approve the product, color, and installation method before Broward County will issue the impact-glazing permit. We submit the association packet first, then pull the permit - skipping the sequence is why some contractors lose weeks. Call (754) 254-5294 and we’ll walk you through the paperwork; estimates are free.
It’s a glazing seal problem, which is part of the glass assembly. The seal has failed and moisture has entered the insulated impact glass unit. The frame may be fine. We replace the glass unit with OEM or equivalent impact-rated glazing, and we inspect the weep system to prevent repeat failure. Call (754) 254-5294 for a free inspection and written quote.
Salt-laden air and sustained humidity keep aluminum tracks wet here, especially on homes within a few miles of the Atlantic air corridor. The track corrodes, rollers pit, and the door drags or jumps. We replace with corrosion-resistant rollers, clean and treat the track, and clear the weep system so water exits instead of pooling. Call (754) 254-5294 to schedule service.
No - not if the oxidation has compromised the rough opening. An insert relies on the existing frame being square and structurally sound. In Sunrise’s 1970s-80s housing stock, we find oxidized aluminum frames have often eaten into the CBS rough opening itself. We measure with a laser level and moisture meter; if the opening is out of square or the substrate is compromised, we recommend full-frame replacement with re-flashing. Call (754) 254-5294 for an honest assessment.
No. We are an independent contractor with no manufacturer affiliation, sponsorship, or endorsement from ECO Window Systems. We service their products based on field experience across Broward County, using OEM parts when available and documented aftermarket equivalents when necessary. Our 365-Day Done Right Promise and Haven Standard documentation apply to every job, regardless of brand authorization status. Call (754) 254-5294 with questions.
Service Areas Near Sunrise
We run ECO Window Systems service calls across central and western Broward from our Sunrise base. Nearby cities we cover include ECO Window Systems service in Lauderhill, directly south of Sunrise Lakes; ECO Window Systems service in Tamarac, to the north; Plantation, with its own concentration of 1970s-era homes needing impact retrofits; Lauderdale Lakes, where we see similar aluminum-frame oxidation patterns; and Margate, at the northern edge of our regular service radius. Each has its own permit office and, in some cases, association review requirements - we know which is which.
Book Your ECO Window Systems Service in Sunrise Today
Call (754) 254-5294 to schedule your free measured survey. A live person answers, 24/7. You’ll receive a written price before any work starts, a documented photo record when the job is done, and the 365-Day Done Right Promise stamped on every opening. For Sunrise Lakes and other managed communities, we handle the two-track approval process as standard - no add-on, no surprise.
Written by Sonia Raman, Owner at Sightline Windows & Doors Sunrise, serving Sunrise since 2012.