Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterES Windows Windows & Doors in Sunrise, FL | Sightline Windows & Doors Sunrise
We provide independent ES Windows service across Sunrise, from Sunrise Lakes to Inverrary. The one thing that makes our ES Windows work here different: we’ve spent years reconciling ES Windows frame tolerances with Broward County’s 140+ mph wind-load code on 1970s-era rough openings that were never built for impact-rated units. Call (754) 254-5294 to schedule your free estimate.
Why Sunrise Residents Choose Us for ES Windows Service
We’ve worked on ES Windows aluminum and vinyl frames in Sunrise since before the county tightened impact-glazing enforcement. That means we’ve seen how the 7000 Series single hungs installed in the 1980s hold up against salt-laden air, and we know which ES Windows impact-rated vinyl units actually fit the existing rough openings in CBS construction without chewing up the stucco.
Sonia Raman, our owner, grew up in Miami and learned glazing at Miami Dade College’s Kendall Campus - she worked fabrication and installation before she ever wrote a quote. In Sunrise, her crew has done enough work in Inverrary that she still uses those sightline alignments as the reference standard when training new hires. She tracks Broward weather data because the gap between a correctly bedded frame and a leaking one shows up the first named storm.
We’re an independent service provider. Not authorized by ES Windows, not endorsed. We source OEM-profiled parts - glazing, seals, rollers, balances - and we document every frame condition with photos you keep. Haven Clause 1: the measured survey and the written quote are the same document. No change orders.
Common ES Windows Windows & Doors Problems We Solve in Sunrise
- Glazing seal failure on original aluminum ES Windows units. In Sunrise Lakes, 40-plus years of UV and humidity causes the IG seal to let go. The unit fogs, and the frame becomes a water channel. We see this in nearly every original 7000 Series we inspect.
- Aluminum frame oxidation and pitting. Sunrise sits 10-12 miles inland, but salt-laden air still reaches these frames. The finish degrades, corner joinery loosens, and the frame loses structural integrity. Once pitting is through-wall, repair is no longer honest.
- Patio door threshold seal separation on ES Windows sliders. Sustained humidity cracks the threshold gasket. Water tracks under the door during summer downpours. The 9000 Series 3-Lite Slider is particularly prone if the original gasket hasn’t been replaced.
- Operator and roller hardware fatigue. Original nylon rollers and sash balances on ES Windows single hungs and horizontal rollers don’t survive 40 years of cycling. In heavily used 55-plus units, we replace these with OEM-profiled hardware that matches the original spec.
- Non-impact-rated frames in a 140+ mph zone. Every replacement window or door in Sunrise must meet Broward County’s design wind-load. Original ES Windows aluminum single-pane units never do. We measure the rough opening, specify the impact-rated replacement, and pull the permit.
Before
AfterES Windows Service in Sunrise: What Local Conditions Mean for Your Equipment
Sunrise was almost entirely built out between the late 1960s and early 1980s. The result: massive 55-plus communities like Sunrise Lakes still carry original aluminum single-pane windows installed decades before Florida’s post-Hurricane Andrew impact-resistance mandates. Broward County enforces 140+ mph design wind-load compliance on every permitted replacement. So virtually every Window Replacement in Sunrise is simultaneously a retrofit and a full impact-upgrade project.
This combination is less common in newer cities on either side. In Sunrise Lakes specifically, every replacement has to clear two separate tracks: the condo association’s architectural review board and Broward County’s impact-glazing permit inspection. Contractors who don’t pre-submit the association approval paperwork before pulling the permit routinely face multi-week delays. We pre-submit. The two-track paperwork clears without stalling the job. Measure it right once, and the install tells you nothing went wrong.
ES Windows Models & Products We Service in Sunrise
We work on the full ES Windows residential line: 7000 Series Single Hung, 8000 Series Horizontal Roller, 9000 Series 3-Lite Slider, and Impact-Rated Vinyl Single Hung. For units still within service life, we stock OEM-profiled glazing, seals, rollers, and balances locally for fast Sunrise turnaround. When the aluminum is pitted through or the frame is non-impact-rated, we specify the impact-rated replacement and document why. We repair what’s genuinely serviceable. We replace what isn’t. No upsell on a frame with real life left.
Our ES Windows sales & service covers impact-resistant windows, full frame replacement, and single hung impact windows - specified by what your opening requires, not by what is in stock.
ES Windows Service Pricing in Sunrise
ES Windows service in Sunrise typically runs $180-$340 for hardware and seal repairs on serviceable frames. Full-frame replacement with impact-rated ES Windows units ranges $650-$1,400 per opening, depending on size, wind-load rating, and whether the rough opening needs reframing. The condo association pre-submission and Broward County permit are included in our scope, not added later.
Every estimate starts with a measured survey you keep. The written quote cannot differ from that document. Call (754) 254-5294 for an exact quote - estimates are free.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - ES Windows Windows & Doors in Sunrise
Yes. We pre-submit the architectural review board packet before pulling the Broward County permit. The two-track process is standard for us. Call (754) 254-5294 to schedule - estimates are free.
If the frame is structurally sound and impact-rated, we can reglaze with an OEM-profiled IG unit. If the aluminum is pitted or the frame predates impact codes, replacement is the honest call. We document the frame condition and show you both options. Call (754) 254-5294 for an exact quote - estimates are free.
Yes. Broward County requires 140+ mph design wind-load compliance on every permitted replacement. We specify Sunrise Impact Windows & Doors units that meet or exceed this standard and pull the permit as part of our scope.
Year-round humidity and periodic salt-laden air crack threshold gaskets and accelerate aluminum oxidation. Sunrise’s inland position doesn’t eliminate coastal air influence - it just moderates it. The cumulative effect shows up in 40-year-old frames faster than in drier climates.
No. We are an independent service provider, not authorized, endorsed, or affiliated with ES Windows. We source OEM-profiled parts and apply our own installation standards under the Haven Standard. Our Sunrise service area coverage is independent.
Service Areas Near Sunrise
We handle ES Windows service across Broward County, including ES Windows service in Lauderhill, ES Windows service in Tamarac, Plantation, Lauderdale Lakes, and Margate. The same two-track permit process applies in many of these municipalities.
Book Your ES Windows Service in Sunrise Today
Call (754) 254-5294 to schedule your free estimate. Live person answers, 24/7. We’ll bring the measured survey, the written price, and the documented photo record. Haven Clause 1: the quote and the measurement are the same document.
Written by Sonia Raman, Owner at Sightline Windows & Doors Sunrise, serving Sunrise since 2012.