Custom & Geometric Windows in Sunrise - Free Measure, Exact Written Quote

Trusted Custom & Geometric Windows for Sunrise Homeowners

Custom and geometric windows in Sunrise typically cost $800 to $4,500 per opening depending on shape complexity, impact rating, and glazing specification, with most measured surveys scheduled within 48 hours and installation following two to three weeks after order confirmation. At Sightline Windows & Doors Sunrise, we’ve installed 18,000+ openings since 2012 under the Haven Standard, and every custom or geometric window job begins with a measured survey the customer keeps - the same document that becomes the written quote and, finally, the final invoice. Call (754) 254-5294; a live person answers, 24/7.

Call (754) 254-5294

Sunrise presents specific challenges for non-standard window shapes. The city’s mix of 1980s-era ranch homes in Welleby, Mediterranean-influenced builds in Sawgrass Estates, and newer construction near Sawgrass Mills means we regularly measure openings that don’t fit catalog stock: trapezoids following roof pitches, half-rounds above entryways, and oversized fixed glass in great rooms that standard vinyl frames cannot accommodate. The Broward County wind zone - 170 mph design pressure in most of Sunrise - also means custom shapes must carry impact-rated certification or be paired with approved shutter systems, a detail many homeowners discover only when they request a permit application.

We’ve replaced geometric units in Sunrise homes where the original builder used single-glazed anodized aluminum shapes that leaked at the miter joints after fifteen Florida summers. We’ve also specified new construction-grade custom impact windows for additions in Plantation Acres where the architect drew a twelve-foot radius arch that no standard manufacturer catalogued. In both cases, the process was identical: measured survey, written price, documented photo record, 365-Day Done Right Promise. No verbal estimates. No change orders. The measurement and the quote are the same document - Haven Clause 1 since 2012.

What Our Custom & Geometric Windows Service Includes

Custom Impact Windows

Custom impact windows are non-rectangular or oversized openings engineered to meet Miami-Dade or Florida Building Code impact standards without secondary protection like shutters or panels. You need these when your home’s architecture includes shaped openings in the envelope - a half-round transom over a front door, a pentagon in a stairwell landing, or a trapezoid following a cathedral ceiling line - and you want continuous glazing rather than a boarded or shuttered look during storm season. At Sightline Windows & Doors Sunrise, we specify custom impact shapes from PGT and CGI with laminated glass packages tested to HVHZ protocols, and we verify that every custom unit carries the Florida Product Approval number required for permit submission in Sunrise and unincorporated Broward County. The measured survey includes frame opening dimensions to 1/16 inch, rough opening verification, and a photo record of the existing condition - all documents the customer keeps before any deposit is taken.

Geometric & Shaped Windows

Geometric and shaped windows are fixed or operable units manufactured to angles and curves outside standard 90-degree construction: triangles, trapezoids, octagons, ellipses, and segmented arches. You need these when replacing original builder shapes in older Sunrise subdivisions like Springtree or Sunset Strip, or when adding architectural interest to a renovation that standard rectangles would flatten. Sightline measures each geometric opening with a digital angle finder and cross-checks against the manufacturer’s current catalog - geometric lines change seasonally, and a 30-60-90 triangle from one production year may not match the next. We specify from ES Windows and ECO Window Systems for geometric work in Sunrise, selecting stock shapes where possible to control cost and engineering custom mullions only when the opening demands it. Every geometric quote includes a scaled drawing for customer approval before fabrication begins.

Arched & Curved Windows

Arched and curved windows include half-rounds, quarter-rounds, elliptical tops, and true radius units where the frame follows a continuous curve. You need these when matching existing architecture - common in Sunrise’s 1990s-era homes with Mediterranean or Tudor detailing - or when a design calls for a radius that standard springline products cannot achieve. Sightline’s measured survey for arched openings records the springline width, rise height, and radius center point; for true radius units, we verify whether the manufacturer requires a template or can work from digital measurements. We’ve installed arched impact-rated units from Mr-Glass in Weston Hills adjacent homes and specified Therma-Tru coordinating sidelites with radius tops for full-entryway systems in Lauderhill near the Sunrise border. The Haven Standard requires that every arched unit be delivered with the documented photo record showing the uncrated condition and the installation sequence, so the customer has evidence of proper handling.

Oversized Openings

Oversized openings are fixed or operable windows exceeding standard manufacturing dimensions, typically width over 60 inches or height over 96 inches, often requiring steel or reinforced aluminum framing and multi-point locking hardware. You need these for contemporary homes in Sunrise’s newer infill areas or for great-room replacements where a wall of glass is the design intent rather than an assembly of smaller units. Sightline specifies oversized units from ViewLux and CWS with structural engineering letters for permit submission, and we coordinate crane or boom-lift access when the opening cannot be handled by crew alone - a common situation in two-story Sawgrass area homes with rear-lot water views. The measured survey for oversized openings includes load-path analysis, header condition documentation, and a written scope noting any structural modification required. The price named in that survey includes the crane, the engineering, and the permit - not added later as a “surprise” line item.

Brands We Service for Custom & Geometric Windows

We work with eight manufacturer lines for custom and geometric window specification in Sunrise, selected by performance tier and price range rather than margin. For impact-rated custom shapes, we regularly specify PGT and CGI - both maintain active geometric catalogs with Florida Product Approval, and we’ve documented hundreds of installations with their laminated glass packages since 2012. ES Windows and ECO Window Systems serve our mid-tier geometric and oversized projects; their aluminum framing systems accept custom angle cuts without the premium of fully engineered shapes, which matters in Sunrise’s 1980s-era homes where the original openings were built to nominal dimensions that modern stock doesn’t match. Mr-Glass supplies our true radius and specialty curved work, with template-based fabrication that we’ve coordinated for homes from Welleby to the Plantation border. Therma-Tru provides coordinating entry systems when a geometric window sits above or beside a door unit, ensuring sightline alignment and consistent frame depth. CWS and ViewLux round out our oversized and high-performance custom options.

Every brand we specify is backed by a manufacturer’s warranty we document in the customer’s file, and our 365-Day Done Right Promise covers installation labor regardless of brand. Whether you have PGT, CGI, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, CWS, or ViewLux in your Sunrise home - or any other make - we can measure, specify replacement, and install to the Haven Standard. Bring us a competitor’s written estimate and we’ll review it at no charge; Haven Clause 1 applies to our response as well.

Before

After

Signs You Need Custom & Geometric Windows Right Now

• Visible frame separation at mitered corners. Geometric window frames are joined at compound angles that stress the corner seals more than standard rectangles. In Sunrise’s climate, thermal expansion and salt-air exposure accelerate sealant failure at these joints. We regularly find separated miters in original 1990s geometric units in Sawgrass and Springtree homes, and the resulting water intrusion often damages the rough opening before it’s visible inside.
• Condensation between panes on shaped or oversized units. Custom glass packages use edge spacers that differ from stock production, and failed seals in geometric shapes cannot be repaired - the insulated glass unit must be replaced. If you’re seeing fogging in a half-round, trapezoid, or arched unit, the glazing has reached end of service life. Sightline documents the existing glass specification during the measured survey and sources a matching replacement from the original manufacturer or an approved equivalent.
• Difficulty operating or locking custom-shaped operable units. Geometric windows that open - trapezoid casements, arched hoppers - use specialty hardware that wears faster than standard rectangular systems. If the crank mechanism binds or the multi-point lock won’t engage fully, the frame may have racked out of square, or the hardware may be obsolete. We inventory current hardware for PGT, CGI, and ES Windows geometric lines and can source discontinued mechanisms through manufacturer archives when needed.
• Permit denial on a renovation or addition due to non-compliant existing windows. Sunrise enforces the Florida Building Code’s glazing requirements strictly; if your project triggers a whole-house evaluation, original single-pane geometric shapes in the envelope may require replacement to obtain the certificate of occupancy. We’ve assisted homeowners in Sunset Strip and Weston Hills adjacent areas through this process, specifying compliant custom impact units that match the original sightlines while satisfying the inspector’s checklist.
• Planned renovation that alters wall openings. If you’re removing a standard window and expanding to an oversized fixed unit, or if an architect has drawn a new geometric shape for a kitchen or master suite, the specification process should begin before framing begins. Sightline’s measured survey for renovation work includes rough-opening verification, header sizing review, and coordination with your contractor’s schedule - the written price covers the window, the installation, and any structural adaptation we identify during survey.

Our Custom & Geometric Windows Process - Step by Step

1. 1
   Initial call and scheduling. When you call (754) 254-5294, a live person answers - no voicemail queue, no callback window. We schedule a measured survey at your Sunrise home, typically within 48 hours for standard requests. You’ll receive a confirmation text with the technician’s name, license number, and estimated arrival window. Haven Clause 3 (Verified Crews) means the person at your door is the person on the record.
2. 2
   Measured survey and documentation. The technician arrives in uniform with a background-checked ID and license number visible. For custom and geometric work, we record: opening width, height, and depth to 1/16 inch; wall construction type and header condition; existing frame and trim dimensions; digital photographs of all four sides of the opening and the surrounding wall; and for geometric shapes, springline, rise, radius center point, or angle measurements as applicable. You keep a copy of the survey document before we leave. This is Haven Clause 1: the measurement and the quote are the same document.
3. 3
   Written quote and specification. Within 24 hours of survey completion, you receive a written quote naming the manufacturer, product line, glass package, hardware finish, and installation scope - with a single price that includes labor, materials, permit fees, and disposal. For custom shapes, the quote includes a scaled drawing for your approval before fabrication begins. The price cannot differ from the measured survey; if we missed something, we absorb it. No change orders. No “discoveries” at installation.
4. 4
   Fabrication and permit coordination. Custom and geometric windows typically require 4-8 weeks for fabrication depending on complexity and manufacturer backlog. Sightline submits permit applications to the City of Sunrise or Broward County as required, using the Florida Product Approval numbers from the specification. We coordinate delivery to minimize storage time and schedule installation when your opening is ready - not before, not with a gap that leaves the home exposed.
5. 5
   Installation and documented closeout. The installation crew arrives with the verified credentials, installs to manufacturer specification and Florida Building Code, and photographs each stage: uncrated condition, rough opening preparation, installed unit with level verification, and finished trim. You receive the documented photo record, the final invoice matching the written quote, and the 365-Day Done Right Promise stamped and dated. If it’s not done right, we make it right - written into the Haven Standard, not a verbal assurance.

How Much Does Custom & Geometric Windows Cost in Sunrise?

Custom & Geometric Windows Near Sunrise - Our Service Area

Sightline Windows & Doors Sunrise installs custom and geometric windows throughout central and western Broward County, with typical measured survey scheduling within 48 hours for Lauderhill, Tamarac, Plantation, Lauderdale Lakes, Margate, Davie, Oakland Park, Coral Springs, Fort Lauderdale, Cooper City, and Pompano Beach. Response times extend slightly for Weston and southwestern Palm Beach County. We’ve completed custom geometric installations in Sawgrass estate homes, Welleby ranch renovations, and Plantation Acres new construction, and we understand the permit requirements for each jurisdiction - Sunrise’s building department, Broward County’s unified permitting, and the specific inspection sequences for impact-rated custom shapes. Whether you need Custom & Geometric Windows in Lauderhill or Custom & Geometric Windows in Tamarac, the Haven Standard and the same measured survey process apply.

Frequently Asked Questions - Custom & Geometric Windows in Sunrise

Schedule Your Custom & Geometric Windows Service in Sunrise Today

Call (754) 254-5294 to schedule your free measured survey. A live person answers, 24/7. You’ll receive a written price before any work starts, a documented photo record when the job is done, and the 365-Day Done Right Promise stamped on every installation. Sightline Windows & Doors Sunrise serves homeowners throughout Sunrise, Lauderhill, Tamarac, and central Broward County with custom and geometric windows specified from eight verified manufacturer lines. The measurement and the quote are the same document - Haven Clause 1 since 2012.

Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Sunrise since 2012.