Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTrusted Window Installation for Sunrise Homeowners
Window installation in Sunrise, FL typically runs $650-$2,400 per opening depending on frame material, glazing specification, and whether the unit is impact-rated for Broward County’s High-Velocity Hurricane Zone. Most residential installations our team completes in Sunrise neighborhoods like Sawgrass Estates, Welleby, and Sunrise Golf Village are finished in one to two days with the written quote matching the final invoice exactly. We’ve installed and replaced more than 18,000 windows and doors since 2012 under the Haven Standard, and every Sunrise job begins with a measured survey the customer keeps and ends with a documented photo record.
Sunrise presents specific conditions that affect how windows perform and how they should be specified. The city’s position inland from Fort Lauderdale means less direct salt spray than coastal properties, but afternoon thunderstorms from June through October still test seal integrity and drainage paths. Many homes in Sunrise’s 33323, 33351, and 33326 ZIP codes were built during the 1980s and 1990s construction waves, meaning original aluminum frames have often reached the end of their thermal and structural service life. Our technicians find that Sunrise homeowners frequently discover their windows need replacement not from obvious failure but from rising FPL bills and rooms that never reach the thermostat setting despite the AC running continuously.
We answer calls live at (754) 254-5294, 24 hours a day. The person who picks up can schedule your measured survey, explain what documentation you’ll receive, and tell you which manufacturer lines we specify for your particular opening conditions.
What Our Window Installation Service Includes
Single & Double Hung Windows
Single hung windows have one operable sash, the bottom one; double hung units allow both sashes to move, which matters in Sunrise’s climate because you can open the top sash to vent hot air while keeping the bottom closed for security or child safety. We specify these for bedrooms and secondary living spaces where vertical operation fits the wall layout and where egress requirements determine minimum opening dimensions. Our measured survey records the exact rough opening, the existing frame’s plumb and square readings, and whether the wall is block or frame construction, all of which affect how we order from PGT or ES Windows for your particular installation.
Horizontal Roller Windows
Horizontal rollers, also called sliding windows, move along a track rather than lifting against gravity, which makes them the practical choice for wide openings over kitchen sinks, behind sofas, or any location where a protruding sash would obstruct traffic or furniture. In Sunrise we see these specified frequently for patio-facing walls where the homeowner wants maximum glass area with minimal frame interruption. Our installations include verification of the sill pan slope and weep hole placement, because horizontal rollers in Broward’s rain volume will fail prematurely if water cannot evacuate the track assembly.
3-Panel Sliding (3-Lite Roller) Windows
3-Panel Sliding (3-Lite Roller) Windows use three sashes in a single frame, typically with two operable panels flanking a fixed center lite, giving you roughly two-thirds ventilation area on a wall that would otherwise require a fixed picture window. We recommend these for Sunrise homes with rear walls facing west, where the fixed center can be specified with lower SHGC glass to reject afternoon heat while the operable panels still allow cross-ventilation. The Haven Standard requires that we document the sightline measurement, the visible glass dimension between frame members, before ordering so you know exactly what your view will be once the installation is complete.
Casement Windows
Casement Windows hinge at the side and crank outward, catching breezes and directing them into the room, which makes them the most effective operable window for natural ventilation in Sunrise’s prevailing easterly wind pattern. They also seal more tightly than sliding or hung units because the sash draws against the frame gasket when closed, improving both air infiltration resistance and acoustic performance. We specify casements from CGI or ECO Window Systems for bedrooms facing Sunrise Boulevard or other traffic corridors where the compression seal’s noise reduction is measurable.
Awning & Hopper Windows
Awning & Hopper Windows are two distinct types: awnings hinge at the top and open outward, while hoppers hinge at the bottom and open inward. Awnings are the only operable window that can stay open during light rain, which matters in Sunrise’s brief but intense afternoon storms from May through October. We install these above fixed units or doors where the homeowner wants ventilation without water intrusion, and we specify them with limit devices that prevent over-extension in wind. Hoppers we reserve for basement-level openings or specific architectural conditions where inward operation is required by the opening’s position.
Picture & Fixed Windows
Fixed windows do not open; they exist to admit light and provide thermal and visual separation between interior and exterior. Because they have no operable hardware, they offer the best sightline ratio and the lowest air infiltration rate of any window type, which is why we specify them for great rooms, stairwells, and any wall where the primary function is framing a view rather than ventilation. In Sunrise we frequently pair fixed units with adjacent casements or awnings, and our measured survey documents the mullion spacing so you see the exact grid pattern before we order glass.
Bay & Bow Windows
Bay & Bow Windows project from the wall-bay styles in three facets, typically with a fixed center and operable flanks, and bow styles using four or more facets to create a gentler curve. These add floor space and interior volume, which is why we see them requested in Sunrise’s 1990s-era homes where the original builder-grade flat wall feels undersized for current use. Installation requires structural support for the projected weight, and our survey includes assessment of the header capacity and the foundation below the projection. We specify the roof assembly, insulation, and interior finish as part of the written scope, not as discovered conditions billed later.
Garden Windows
Garden windows are mini-greenhouse projections, typically over a kitchen sink, with sloped glass above and fixed or operable sides. In Sunrise’s growing season they extend herb and vegetable cultivation year-round, but they also introduce significant solar heat gain if not specified with proper glazing. We install these with tempered safety glass on all surfaces, integrated seat boards sized to your counter height, and optional operable vents for temperature regulation. Our photo record documents the installation from exterior and interior perspectives so you have evidence of proper flashing and sealant application.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Window Installation
We specify from eight verified manufacturer lines, selected by what your opening requires, not by what we have in inventory. For impact-rated installations in Sunrise’s High-Velocity Hurricane Zone, we frequently draw from PGT and CGI, both Florida-manufactured lines with Miami-Dade and Broward product approval numbers on file. We’ve installed hundreds of PGT WinGuard and CGI Estate series units in Sunrise neighborhoods from Sawgrass to Plantation Acres, and we maintain current specification sheets and warranty documentation for every product line we carry. ES Windows contributes aluminum and vinyl impact options at mid-tier price points, with thermal break technology that meets the 2023 Florida Energy Code without the premium of composite framing.
For non-impact replacement windows where the existing shutter system remains functional, we specify ECO Window Systems and Mr-Glass for their U-factor and SHGC performance at competitive cost. Therma-Tru, primarily known for entry systems, also manufactures window products we integrate into full-opening renovations where door and window replacement occur together. ViewLux rounds out our offerings for custom geometric and architectural shapes where standard rectangles won’t serve the design. Whether your Sunrise home currently has PGT, ES Windows, or any other make, we can assess its condition, match or upgrade its performance specification, and install replacement units that integrate with your existing interior and exterior finishes.
Before
AfterSigns You Need Window Installation Right Now
- Visible frame deterioration or corrosion. In Sunrise’s subtropical climate, aluminum frames eventually develop pitting and white oxidation; vinyl frames crack at the corners after UV exposure; wood frames rot where sealant has failed. Once the frame material itself is compromised, weatherstripping replacement becomes a temporary fix, and the thermal bridge at the damaged section will continue to drive energy loss.
- Condensation between glass panes. Dual-pane units with failed seals exhibit fogging that cannot be wiped away from either side. This means the insulating air or argon fill has escaped and moisture has entered, reducing the unit’s U-factor to approximately that of a single pane. In Sunrise’s cooling-dominated climate, failed IGUs force your AC to work harder to maintain setpoint.
- Difficulty operating sashes or hardware. Windows that stick, won’t stay open, or require force to latch have often racked out of square due to foundation settlement or repeated impact from wind pressure. Forced operation stresses the frame and can crack glass; it also means the window cannot serve as an egress path in an emergency.
- Audible air infiltration or visible light gaps. If you can hear wind through closed windows or see daylight between sash and frame, your infiltration rate exceeds code requirements by a significant margin. In Sunrise, where AC runs eight to ten months annually, this leakage directly inflates your FPL bill and degrades indoor humidity control.
- Neighbor or HOA replacement triggers. In Sunrise communities with architectural review boards, deferred window replacement can become urgent when adjacent homes complete renovations and your deteriorating units become conspicuous. More critically, if your HOA has mandated impact-rated replacement and your current windows are non-impact with expired shutter systems, your insurance coverage may be affected.
Our Window Installation Installation Process - Step by Step
- 1
Measured survey and written scope. Our technician arrives at your Sunrise property with a laser measure, level, and camera. We record every rough opening dimension to the eighth inch, note the wall construction type, assess the existing frame’s condition, and photograph the interior and exterior conditions. You receive a copy of this survey before we leave. The written quote we generate from this document is the same document that governs the installation; Haven Clause 1 requires no deviation.
- 2
Product specification and order. Based on the survey, we specify the manufacturer line, series, and options for each opening. For Sunrise installations, this includes verification of impact rating if required, energy performance values that meet or exceed the Florida Energy Code, and finish color matched to your existing trim or updated per your direction. We provide the product data sheet and warranty document for your review before ordering.
- 3
Permit application and inspection scheduling. Window installation in Sunrise requires a Broward County building permit for all impact-rated replacements and for any non-impact replacement that alters the opening size. We pull the permit, schedule inspections, and include all associated fees in the written scope. You receive the permit card and inspection schedule; you do not coordinate with the county.
- 4
Installation by verified crews. Haven Clause 3 requires that the technician who arrives is the technician on the record. Our crews are background-checked, uniformed, and identified by license number before entering your property. Installation follows the manufacturer’s written instructions and the Florida Building Code, with continuous inspection readiness. We protect floors and furnishings, remove and dispose of existing units, and verify each new installation for level, square, and proper fastening before sealant application.
- 5
Documentation, inspection, and warranty activation. Upon completion, we provide the documented photo record showing pre-condition, installation progress, and finished state. We schedule and meet the county inspector, activate manufacturer warranties with your information, and stamp the job with the 365-Day Done Right Promise. Your final invoice matches the written quote; Haven Clause 5, No Surprises, is satisfied.
How Much Does Window Installation Cost in Sunrise?
| Window Type | Typical Range in Sunrise | Primary Cost Drivers |
|---|---|---|
| Single or double hung, non-impact vinyl | $650-$1,100 per opening | Size, grid pattern, installation floor |
| Horizontal roller, non-impact vinyl | $750-$1,250 per opening | Width, screen type, sill condition |
| Casement, non-impact vinyl | $900-$1,400 per opening | Hardware grade, crank mechanism, size |
| Impact-rated single/double hung | $1,200-$2,000 per opening | PGT vs. CGI series, laminate type, size |
| Impact-rated horizontal roller | $1,350-$2,200 per opening | Track assembly, interlayer, width |
| Picture or fixed, impact-rated | $1,000-$1,800 per opening | Glass thickness, size, structural anchoring |
| Bay or bow, custom configuration | $3,500-$7,500 per unit | Projection depth, roof type, seat construction |
| Garden window | $2,200-$4,000 per unit | Glass specification, vent options, interior finish |
These ranges reflect our actual installed pricing in Sunrise for 2024 and 2025, not national averages. Several factors move a given project within or beyond these brackets. First, the existing frame condition: if we find rot in the rough opening or compromised header support, structural repair adds labor and material not visible from the interior finish. Second, floor level: third-story installations in Sunrise’s townhome communities require additional equipment and safety measures. Third, interior trim complexity: matching or replicating custom millwork adds finish carpentry time. Fourth, permit and inspection fees, which Broward County adjusts periodically and which we include in the written scope rather than adding later.
To avoid overpaying, we recommend obtaining a written estimate that itemizes each opening separately rather than presenting a single lump sum. The Haven Standard requires this itemization; it also allows you to compare our specification directly against any competitor’s quote. We offer a Free Second Opinion on Any Written Estimate, bring us another installer’s scope and we will review the product specification, installation details, and pricing at no charge. Call (754) 254-5294 to schedule your measured survey; the written quote you receive carries no obligation and cannot change without a change order you approve in writing.
Window Installation Near Sunrise - Our Service Area
We install and replace windows throughout Sunrise and adjacent Broward County communities. Typical response time for a measured survey in Sawgrass, Welleby, or Sunrise Golf Village is next business day; for Window Installation in Lauderhill and Window Installation in Tamarac, we generally schedule within two business days. Our service radius extends to Plantation, Lauderdale Lakes, Margate, Davie, Oakland Park, Coral Springs, Fort Lauderdale, Cooper City, and Pompano Beach, with travel time built into the schedule rather than added as a surcharge. If your property falls within Broward County’s High-Velocity Hurricane Zone, we verify the specific wind-borne debris requirements for your municipality before specifying product, because code interpretation varies slightly between Sunrise and neighboring Fort Lauderdale.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Window Installation in Sunrise
Window installation is the complete process of removing an existing window unit and replacing it with a new one, including assessment of the rough opening, structural support, weather barrier integration, and interior finish restoration. At Sightline, the installation begins with a measured survey you keep and ends with a documented photo record, a passed county inspection, and an activated manufacturer warranty. The work is governed by the Florida Building Code and, in Broward County, specific requirements for impact resistance or approved shutter systems.
Most single-opening replacements in Sunrise are completed in two to four hours; full-home projects of ten to fifteen openings typically require one to two days depending on product availability and inspection scheduling. Multi-story installations or projects requiring structural repair may extend to three days. We provide a specific schedule in the written scope before work begins, and Haven Clause 2 requires we arrive on that schedule or communicate a change before you call us. Call (754) 254-5294 for a timeline based on your specific opening count and configuration.
Window installation in Sunrise ranges from $650 for a standard non-impact vinyl replacement to $2,400 or more for large impact-rated custom units, with full-home projects typically falling between $8,000 and $25,000 depending on opening count and product specification. The final price depends on frame material, impact rating requirement, glass performance options, and existing condition of the rough openings. Every quote we provide is itemized by opening, written before any work starts, and protected by the 365-Day Done Right Promise. Call (754) 254-5294 for your exact estimate; the measured survey and written quote are free.
Yes, we are an authorized specifier and installer for both ES Windows and ECO Window Systems, with current product training and warranty registration access for both lines. ES Windows contributes aluminum and vinyl impact-rated options with thermal break construction; ECO Window Systems specializes in energy-efficient vinyl replacement windows that meet Florida code without impact rating when paired with approved shutters. We stock specification data, maintain direct manufacturer contact, and can source warranty replacement parts for installations we complete. If your Sunrise home currently has either brand, we can match the series or recommend an upgrade path based on current code requirements.
We answer calls live 24 hours a day at (754) 254-5294, and we can typically schedule a measured survey within 24 hours for urgent conditions such as failed impact glass after a storm, vandalism, or structural compromise that leaves your home exposed. However, we do not promise same-day installation for planned replacement projects, because proper measurement, product ordering, and permit acquisition require time that rushed work would compromise. True emergencies, such as board-up needs after breakage, we address with temporary securing measures while the permanent installation is scheduled and specified under the Haven Standard.
Every installation is covered by the manufacturer’s product warranty, which ranges from lifetime limited on many vinyl lines to twenty years on specific impact glass laminates, plus our 365-Day Done Right Promise on workmanship. The manufacturer’s warranty covers glass failure, frame defect, and hardware malfunction; our promise covers installation quality, including air infiltration, water intrusion, and operational function. If anything is not done right, we make it right, and the remedy is written into the Haven Standard, not offered as a discretionary courtesy. Documentation of both warranties is included in your job file.
Clear a three-foot workspace on the interior side of each opening, remove wall-mounted items near the windows, and ensure our crew has exterior access without locked gates or unrestrained pets. We protect floors and furnishings with drop cloths and move furniture if necessary, but your preparation reduces installation time and risk to your belongings. If you have alarm sensors on existing windows, notify your monitoring company before our arrival. We will review the specific preparation checklist for your project during the measured survey so nothing is left to assumption. Call (754) 254-5294 to schedule that survey.
Schedule Your Window Installation Service in Sunrise Today
Call (754) 254-5294 to schedule your free measured survey. A live person will answer, confirm a time that works for your schedule, and explain what documentation you’ll receive. The written quote we provide is the same document that governs the installation, every time, under the Haven Standard. No obligation, no change orders, no surprises.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Sunrise since 2012.